Service Detail
Home / Service Detail
Concrete Admixtures
Enhancing the performance, workability, and durability of modern concrete.
Overview :
Concrete is the backbone of modern infrastructure, but standard mixes often lack the specific properties needed for high-performance projects. MCT Chemicals provides advanced concrete admixture solutions from global leaders Sika and Master Builders Solutions. These chemical additives are engineered to modify the behavior of fresh and hardened concrete—improving fluidity for easy pumping, accelerating strength for fast-track construction, or increasing density to prevent water ingress. Whether you are dealing with the high temperatures of Pakistan’s summer or the complex requirements of a high-rise foundation, our admixtures ensure your concrete meets the highest international engineering standards.
As an authorized wholesaler for Sika Pakistan and distributor for Master Builders, we offer everything from high-range water reducers (Sika ViscoCrete) to specialized accelerators (SikaRapid). Our technical team works directly with batching plants and contractors to optimize mix designs, reducing cement consumption while increasing structural lifespan. At MCT Chemicals, we don’t just supply chemicals; we provide the precision technology needed to transform standard concrete into a high-strength, sustainable, and durable building material.
Included & Excluded :
- High-Range Water Reducers (Superplasticizers)
- Accelerators & Retarders
- Waterproofing Admixtures
- Batching Plant Design
- Raw Materials
Construction management :
Plasticizers reduce water by 5–12%, while superplasticizers (High-Range Water Reducers) can reduce water by up to 30%. This allows for “flowing” concrete that is much stronger and easier to pump into deep foundations.
Yes. We use “Set Retarders” and “Retarding Plasticizers” that slow down the chemical reaction of cement. This prevents the concrete from drying too fast (flash setting) and allows workers enough time to finish the surface properly.
Yes. By using high-performance water reducers, we can achieve the same target strength with a lower cement content. This makes the project more cost-effective and environmentally friendly by reducing the carbon footprint.
Unlike surface coatings, integral admixtures like Sika-1 are mixed directly into the concrete. They block the pores of the concrete internally, making the entire structure itself a waterproof barrier.
Most of our Sika and Master Builders admixtures are compatible with all types of Portland Cement (OPC and SRC). However, we always recommend a trial mix at the site to ensure optimal performance with your specific local materials.
Most of our Sika and Master Builders admixtures are compatible with all types of Portland Cement (OPC and SRC). However, we always recommend a trial mix at the site to ensure optimal performance with your specific local materials.
Flooring SERVICES
High-performance industrial and commercial resin flooring systems.
Overview :
Industrial environments demand flooring that can withstand extreme mechanical loads, chemical spills, and constant foot traffic. MCT Chemicals specializes in high-performance epoxy and polyurethane (PU) flooring systems from Sika and Master Builders. These systems are engineered to create a seamless, non-porous surface that is both hygienic and incredibly durable. Whether you require a heavy-duty screed for a manufacturing plant or a decorative, anti-slip coating for a commercial showroom, our solutions provide the necessary resilience. By utilizing advanced resin technology, we help clients reduce maintenance costs and improve safety standards across their facilities. Our flooring solutions are designed to bond perfectly with concrete substrates, providing a finish that resists impact and prevents dusting.
Beyond durability, our flooring systems are tailored to meet specific industry regulations, such as HACCP for food and beverage facilities or ESD-conductive requirements for electronics manufacturing. We provide a comprehensive range of finishes, from high-gloss aesthetic coatings to textured, slip-resistant surfaces for wet environments. The application process involves meticulous surface preparation, including diamond grinding or shot blasting, to ensure maximum adhesion and longevity. By choosing MCT Chemicals, you gain access to global material standards paired with localized technical support. Our goal is to deliver a floor that not only looks professional but also serves as a long-term asset to your infrastructure, standing up to the harshest chemical and physical stresses while remaining easy to clean and maintain for years to come.
Included & Excluded :
- Resin Coating Systems
- Surface Preparation
- Specialized Treatments
- Concrete Slab Construction
- Structural Crack Repair
- Tile Removal
Construction management :
Most of our resin systems allow for light foot traffic within 24 hours, but we recommend waiting 7 days for the floor to reach full chemical and mechanical resistance before moving heavy machinery.
Yes, provided the surface undergoes intensive mechanical preparation. We use specialized primers from Sika and Master Builders designed to bond with older concrete and prevent oil migration from ruining the finish.
Absolutely. We offer specific Polyurethane Concrete (PU-Z) and high-build epoxy systems that are specifically engineered to withstand aggressive acids, alkalis, and solvents used in chemical processing plants.
Yes, we install ESD (Electrostatic Discharge) flooring systems that safely dissipate static electricity, which is a critical requirement for electronics assembly areas, cleanrooms, and laboratories.
Epoxy is generally harder and offers better impact resistance, while Polyurethane is more flexible and handles thermal shocks (like hot water washing) and UV exposure much better than standard epoxy.
For durable, high-traffic surfaces that meet international safety and hygiene standards, choose the industrial flooring expertise of MCT Chemicals. Our premium partnerships with global leaders like Sika and Master Builders ensure a finish that is as resilient as it is professional. We are committed to delivering flooring solutions that provide the perfect balance between aesthetic appeal and industrial-grade performance for any facility.
Waterproofing SERVICES
Advanced protection systems for structural durability and moisture control.
Overview :
Water ingress is the primary cause of structural decay, leading to rebar corrosion, mold growth, and weakened foundations. MCT Chemicals provides high-performance waterproofing systems designed to shield every part of a structure—from deep foundations and basements to podium decks and exposed roofs. By utilizing advanced technologies like Sika’s crystalline systems and Master Builders’ liquid membranes, we ensure a seamless, watertight barrier that withstands hydrostatic pressure and extreme weather. Our solutions are engineered to extend the service life of both commercial and industrial infrastructures by preventing concrete spalling and maintaining the integrity of the building envelope. We specialize in both positive-side and negative-side applications, ensuring a dry environment regardless of external ground conditions.
In a climate where high humidity and seasonal rains pose constant threats, our technical approach focuses on long-term sustainability rather than temporary fixes. We evaluate each substrate to recommend the optimal chemistry, whether it be bituminous, cementitious, or polyurethane-based. Our teams ensure that critical details—such as construction joints, pipe penetrations, and expansion gaps—are treated with specialized waterbars and swellable profiles. This meticulous attention to detail ensures that the structure remains leak-proof under the most demanding environmental loads. By integrating global material excellence with localized technical expertise, we provide a robust defense against the most common causes of building failure, ensuring safety and value for our clients.
Included & Excluded :
- Cementitious & Liquid Membranes
- Joint & Detail Protection
- Foundation Protection
- Primary Structural Works
- Plumbing Repairs
- Final Decorative Finishing
Construction management :
Positive side waterproofing is applied to the side of the structure facing the water source (exterior), while negative side is applied to the interior surface to stop moisture that has already entered the concrete.
Yes, we provide specialized Sika and Master Builders cementitious coatings that are certified non-toxic, solvent-free, and safe for use in potable (drinking) water storage and distribution facilities.
We utilize specialized injection resins and crystalline “negative side” coatings that can be applied to the interior walls, effectively sealing the capillaries of the concrete even against high hydrostatic pressure.
In many cases, yes. We offer liquid-applied polyurethane membranes that can be applied directly over existing surfaces, provided they are clean and structurally sound, creating a seamless and UV-resistant skin.
Depending on the specific Sika or Master Builders system chosen and the application environment, our waterproofing solutions typically offer a service life and technical warranty ranging from 10 to 25 years.
Protecting your investment from water damage requires the high-performance systems and technical guidance of MCT Chemicals. Our partnership with global industry leaders ensures that your structure remains dry, durable, and protected against the elements for decades. We combine the world’s most trusted chemical technologies with a commitment to quality that ensures every joint, surface, and foundation we treat meets international engineering standards.
Grouting & Anchoring Services
High-strength structural connections and precision equipment leveling.
Overview :
In structural engineering, the connection points—where steel meets concrete—are the most critical areas for load distribution. MCT Chemicals provides high-precision Grouting and Anchoring solutions using industry-leading materials from Sika and Master Builders. Whether you are installing heavy industrial machinery that requires zero-shrinkage leveling or anchoring reinforcing bars into existing concrete for structural extensions, our chemical systems provide the bond strength necessary for safety and stability. Unlike standard mortar, our specialized grouts are engineered to flow into tight spaces and expand slightly to ensure 100% contact with the substrate, eliminating voids that cause structural failure.
As an authorized partner for Sika Pakistan, we supply and apply high-performance epoxy and cementitious grouts that resist vibration, impact, and chemical attack. From high-strength precision grouting for bridge bearings to chemical anchoring for balcony railings and heavy steel columns, MCT Chemicals ensures that every connection is permanent and secure. Our systems, such as SikaGrout and MasterFlow, are tested to withstand extreme tension and shear forces, providing peace of mind for engineers and contractors alike.
Included & Excluded :
- Precision Machine Grouting
- Chemical Anchoring
- Structural Baseplate Leveling
- Void Filling
- Civil Foundations
- Mechanical Bolting
Construction management :
Regular mortar shrinks as it dries, leaving a tiny gap between the plate and the concrete. “Non-shrink” grouts like SikaGrout expand slightly, ensuring total contact and proper weight distribution, which is vital for heavy machinery.
Cement-based grouts are cost-effective for general structural filling. Epoxy grouts (like SikaDur) offer much higher strength and chemical resistance, and they are specifically designed for machines that create heavy vibrations.
This depends on the product used. We offer “Rapid Setting” versions that can reach full strength in as little as 2 to 4 hours, though standard structural grouts typically require 24 hours before loading.
Yes, our high-viscosity epoxy resins are designed to “thixotropic” (thick) standards, meaning they stay in the hole without dripping, making them safe and effective for ceiling or wall anchoring.
Yes. Chemical anchoring resins create a completely sealed, airtight, and watertight bond within the concrete, which also protects the steel rebar from corrosion caused by moisture.
Ensure the stability of your infrastructure with the precision anchoring and grouting expertise of MCT Chemicals. Utilizing the global innovation of Sika and Master Builders, we deliver high-performance bonding solutions that secure your structural components against the toughest industrial and environmental stresses.
Roofing SERVICES
Advanced weatherproofing and thermal protection for sustainable roofing systems.
Overview :
The roof is a building’s first line of defense against the harsh environmental elements of the region, including extreme UV radiation, thermal expansion, and seasonal heavy rains. MCT Chemicals provides high-performance roofing solutions that combine superior waterproofing with energy efficiency. By utilizing world-class technologies from Sika and Master Builders, we offer both liquid-applied and sheet-based systems that ensure a seamless, watertight envelope for flat, pitched, or complex roof geometries. Our roofing systems are designed not only to prevent leaks but also to manage thermal loads, reducing the energy consumption required for indoor cooling through solar-reflective “Cool Roof” technology.
A successful roofing project requires meticulous attention to detail at transitions, drains, and parapet walls. Our technical team specializes in the application of reinforced polyurethane (PU) membranes and modified bituminous sheets that remain flexible across a wide range of temperatures, preventing the cracks and bubbles common in inferior materials. We prioritize substrate preparation and the use of specialized primers to ensure a permanent bond that withstands wind uplift and standing water. Whether for new construction or the refurbishment of an existing structure, MCT Chemicals delivers roofing systems that meet international fire and safety standards while providing a reliable, long-term shield for your architectural investment.
Included & Excluded :
- Liquid & Sheet Membranes
- Thermal Insulation
- Detailing & Flashing
- Structural Roof Repairs
- Solar & Mechanical Systems
- Gutter & Drainage Cleaning
Construction management :
Yes, our liquid-applied membranes are ideal for refurbishment. They can often be applied directly over existing felt or concrete, provided the substrate is cleaned and primed, saving the cost of a full roof tear-off.
A Cool Roof utilizes highly reflective coatings that bounce sunlight away from the building. This significantly reduces the surface temperature of the roof, lowering the heat transferred into the building and reducing AC costs.
We use specialized fabric reinforcements embedded between layers of liquid membrane at all corners, joints, and pipe penetrations. This “fleece” reinforcement allows for movement without the membrane tearing or thinning.
We offer different grades of roofing systems. While standard membranes are for maintenance access only, we provide heavy-duty systems designed for regular traffic, such as rooftop walkways or mechanical access areas.
When installed according to manufacturer specifications and properly maintained, our premium roofing systems are designed to provide high-performance protection for 15 to 25 years or more.
For a roof that offers long-term durability and climate-resilient protection, trust the specialized systems from MCT Chemicals. Our authorized range of global roofing products ensures that your structure is shielded from the top down, combining the latest in chemical technology with a commitment to quality and structural integrity.
Repair & Protection
Restoring structural integrity and shielding concrete from environmental decay.
Overview :
Structural degradation due to carbonation, chloride attack, or mechanical wear requires specialized intervention to prevent total failure. MCT Chemicals provides advanced repair mortars and protective coatings from Sika and Master Builders to restore the integrity of concrete structures and extend their service life. Our approach goes beyond surface aesthetics; we focus on the electrochemical and mechanical restoration of the concrete matrix. By utilizing fiber-reinforced mortars and migratory corrosion inhibitors, we address the root causes of spalling and cracking, ensuring that repaired elements regain their original design strength and load-bearing capacity.
Protection is just as critical as repair. Once a structure is restored, it must be shielded from the elements to prevent future damage. We apply high-performance anti-carbonation coatings and hydrophobic impregnations that allow the concrete to “breathe” while blocking the ingress of water, salt, and carbon dioxide. This dual strategy of “Repair and Protect” is essential for infrastructure such as bridges, parking decks, and industrial facilities exposed to harsh environments. At MCT Chemicals, we combine precision engineering with authorized chemical systems to deliver solutions that are not only durable but also compliant with international structural safety standards, securing your infrastructure for the future.
Included & Excluded :
- Structural & Cosmetic Repair
- Corrosion Mitigation
- Protective Coatings
- Structural Demolition
- Foundation Piling
- Architectural Rendering
Construction management :
The most common causes are carbonation and chloride ingress, which lower the pH of the concrete and cause the internal steel reinforcement to rust. As the rust expands, it pushes the concrete outward, causing it to crack or “spall.”
Yes, we utilize specialized underwater mortars and fast-setting hydraulic cements from Sika and Master Builders that are designed to set and bond even in the presence of active water leaks or submerged conditions.
We prioritize mechanical surface preparation to achieve a rough profile and use high-performance epoxy or polymer-modified bonding agents. This ensures the repair becomes a monolithic part of the original structure.
While standard repair mortars fix the surface, we also offer Carbon Fiber (FRP) strengthening systems. These are high-strength wraps that can be bonded to the exterior of a beam to significantly increase its load-bearing capacity.
It depends on the mortar used. While standard mortars require 28 days to cure, we offer rapid-repair systems that allow for the application of protective anti-carbonation coatings within 24 to 72 hours.
For precision engineering and long-term structural restoration, rely on the specialized repair systems from MCT Chemicals. Our authorized range of global leading products ensures that your infrastructure is protected against the harshest environments, combining the world’s most trusted chemical technologies with a commitment to quality that ensures every repair meets international engineering standards.
Sealing & Bonding
High-performance elastic joints and structural bonding for modern construction.
Overview :
Sealing and bonding are the critical “connective tissues” of any construction project, ensuring that separate elements work together as a single, cohesive unit. MCT Chemicals provides high-performance elastic sealants and structural adhesives from Sika and Master Builders that bond a wide variety of substrates, including concrete, glass, metal, and wood. These systems are specifically engineered to accommodate thermal expansion, structural movement, and vibration while maintaining a permanent, airtight, and watertight seal. Without professional-grade sealing, structures are vulnerable to air leakage, water ingress, and energy loss, which can compromise both comfort and structural integrity.
Beyond simple gap-filling, our bonding solutions provide a lightweight and non-corrosive alternative to traditional mechanical fasteners. We utilize advanced polyurethane, silicone, and epoxy chemistries to create bonds that distribute stress evenly across the entire surface area, preventing the localized tension points caused by bolts or screws. Whether it is sealing expansion joints in a high-traffic warehouse floor or bonding facade panels on a skyscraper, MCT Chemicals delivers the technical expertise required to select the right material for the specific substrate and environmental exposure. Our commitment to quality ensures that every joint we treat remains flexible and resilient, even when subjected to extreme UV radiation and heavy architectural loads.
Included & Excluded :
- Elastic Joint Sealing
- Structural Adhesives
- Joint Design Support
- Expansion Joint Covers
- Glass Installation
- Secondary Membranes
Construction management :
A backer rod controls the depth of the sealant and prevents “three-sided adhesion.” This allows the sealant to stretch and contract freely like a rubber band, which is essential for the long-term success of any movement joint.
Yes, we provide specialized structural epoxy adhesives from Sika and Master Builders that are designed for high-load transfers between steel and concrete, often used in bracket fixing and reinforcement.
We utilize “non-staining” silicone sealants specifically formulated without the migrating oils found in standard products. This prevents the dark “halos” or stains that often appear around the joints of natural stone facades.
While both bond surfaces, a sealant is designed primarily for flexibility and filling gaps to prevent leaks, whereas an adhesive is designed for high-strength, load-bearing connections where movement is minimal.
We offer specialized polysulfide and polyurethane-based sealants designed for airfields and industrial chemical plants that remain stable even when exposed to fuel spills, oils, and aggressive cleaning agents.
Achieve permanent, flexible, and high-strength connections in your construction projects with the specialized sealing and bonding range from MCT Chemicals. Our authorized access to global industry leaders ensures your joints and bonds remain secure under the most demanding conditions, combining the latest in chemical technology with a commitment to quality that ensures every connection meets international engineering standards.
Building Finishing
Premium architectural coatings and surface refinements for lasting aesthetics.
Overview :
Building finishing is the final, most visible stage of construction, defining both the aesthetic character and the external protection of a structure. MCT Chemicals provides premium internal and external finishing solutions from Sika and Master Builders, including high-quality renders, skim coats, and architectural coatings designed for long-lasting performance. These systems do more than just provide color; they act as a specialized skin that protects the building from UV degradation, moisture ingress, and atmospheric pollutants. By utilizing advanced acrylic and silicone-based technologies, we ensure that the facade remains vibrant and crack-free even under extreme thermal stress and environmental exposure.
A professional finish requires a perfectly prepared substrate. Our technical approach includes the use of polymer-modified skim coats and high-performance primers that level the surface and ensure maximum adhesion for the final decorative layer. We offer a wide range of textures and finishes, from smooth internal wall refinements to rugged, weather-resistant external renders. At MCT Chemicals, we understand that building finishing is an investment in the structure’s long-term value. Our authorized range of global leading products ensures that your project achieves a world-class appearance while benefiting from the superior durability and anti-carbonation properties required for modern architectural standards.
Included & Excluded :
- Architectural Coatings
- Surface Levelling
- Specialized Priming
- Structural Plastering
- Interior Furniture
- Electrical Finishing
Construction management :
Yes, we offer specialized Master Builders and Sika external coatings that contain biocides to prevent the growth of mold, fungi, and algae, which are common issues in high-humidity environments.
Absolutely. We provide water-resistant, polymer-modified skim coats specifically designed for wet areas, ensuring a smooth and durable surface that won’t peel or degrade when exposed to moisture.
Anti-carbonation paints act as a barrier against carbon dioxide ($CO_2$) and water. This prevents the “carbonation” process that leads to rebar rust and concrete cracking, significantly extending the life of your structure.
Yes, we offer a vast range of standard colors, and we can provide custom color matching to meet specific architectural design requirements using high-quality pigments that resist fading from UV exposure.
Our premium systems are designed for longevity. When applied correctly over a prepared substrate, these coatings typically last 10–15 years before requiring a maintenance refresh, depending on environmental conditions.
For a professional finish that combines beauty with superior protection, choose the architectural solutions from MCT Chemicals. Our partnership with global coating leaders ensures your project looks exceptional and stays protected for years to come, combining the latest in chemical technology with a commitment to quality that ensures every wall and surface meets international engineering standards.
Structural Strengthening
Advanced reinforcement systems to enhance load-bearing capacity and safety.
Overview :
When a structure’s load-bearing capacity needs to be increased due to design changes, aging, or seismic requirements, MCT Chemicals provides world-class strengthening solutions. We utilize high-modulus Fiber Reinforced Polymer (FRP) systems from Sika and Master Builders to provide lightweight yet incredibly strong reinforcement. These advanced carbon fiber technologies offer a non-corrosive alternative to traditional steel plate bonding, making them ideal for retrofitting bridges, commercial buildings, and industrial facilities. Our systems are designed to improve the flexural and shear strength of concrete elements without adding significant weight or changing the architectural profile of the structure.
A successful strengthening project requires precision engineering and high-performance adhesives. Our technical approach focuses on the use of Sika CarboDur plates and MasterBrace fiber sheets, which are bonded to the concrete substrate using specialized structural epoxies. These materials are stronger than steel but a fraction of the weight, allowing for rapid installation with minimal disruption to the building’s occupants. At MCT Chemicals, we ensure that every application is preceded by rigorous surface preparation and followed by bond-strength testing. This meticulous process ensures that the reinforced structure meets modern safety codes and can handle increased loads, securing the long-term viability of your infrastructure assets.
Included & Excluded :
- FRP System Installation
- Structural Adhesives
- Surface Preparation
- Structural Demolition
- Steel Beam Fabrication
- Architectural Cladding
Construction management :
Carbon fiber has a much higher strength-to-weight ratio than steel and is completely non-corrosive. It is also significantly easier and faster to install in tight spaces without the need for heavy lifting equipment or welding.
Because FRP plates and fabrics are very thin (usually 1.2mm to 3mm), they add almost no thickness to the beams or columns. Once painted or covered with a thin plaster, the strengthening system becomes virtually invisible.
Yes, our wrapping systems are highly effective for “seismic confinement” of columns. This increases the ductility of the structure, allowing it to absorb energy and resist collapse during an earthquake
We perform pull-off tests and bond-strength verification after installation. These tests confirm that the epoxy has created a monolithic bond between the carbon fiber and the concrete, ensuring the load is transferred properly.
While the epoxy skins over quickly, it typically takes 24 to 72 hours to reach its full structural design strength, depending on the ambient temperature and the specific Sika or Master Builders product used.
Enhance the safety and longevity of your infrastructure with the advanced structural strengthening systems from MCT Chemicals. Our technical expertise and authorized access to global-leading reinforcement technologies ensure your project meets modern load-bearing standards, combining the world’s most trusted chemical technologies with a commitment to quality that ensures every beam, column, and slab meets international engineering standards.
Surface Treatments
High-performance liquid hardeners and protective agents for durable concrete surfaces.
Overview :
Surface treatments are vital for protecting concrete from environmental hazards and enhancing its long-term aesthetic appeal. MCT Chemicals offers a range of high-performance curing compounds, liquid floor hardeners, and water repellents from Sika and Master Builders that significantly increase the service life and durability of both horizontal and vertical surfaces. These treatments penetrate the concrete matrix to create a denser, more resilient structure that is resistant to abrasion, chemical ingress, and weather-related decay. Without proper surface treatment, concrete remains porous and susceptible to “dusting,” staining, and freeze-thaw damage that can lead to costly structural repairs over time.
A professional surface treatment strategy begins at the moment of pouring and continues through the life of the structure. Our liquid densifiers, based on lithium and sodium silicate technology, chemically react with the free lime in the concrete to create a diamond-hard surface that actually improves with age and use. For vertical facades, we provide hydrophobic impregnations that prevent water absorption while remaining vapor permeable, ensuring the building can “breathe.” At MCT Chemicals, we combine global material excellence with local technical expertise to provide a robust defense for your concrete, ensuring it remains dust-free, easy to maintain, and protected against the most common causes of surface failure in industrial and commercial environments.
Included & Excluded :
- Liquid Hardening & Dustproofing
- Curing & Sealing Compounds
- Hydrophobic Impregnations
- Heavy Diamond Grinding
- Decorative Polished Concrete
- Slab Repair & Pouring
Construction management :
A curing compound forms a temporary film that prevents water from evaporating too quickly. This ensures the concrete reaches its full design strength and significantly reduces the occurrence of plastic shrinkage cracks.
No. Unlike topical waxes or paints, liquid hardeners penetrate the concrete rather than sitting on top. They improve the density of the surface without creating a slippery film, making them ideal for high-traffic warehouses.
Our high-quality Sika and Master Builders silanes typically provide deep protection for 5 to 10 years. The exact timeframe depends on the exposure to harsh weather and the porosity of the original substrate.
In most cases, yes. However, it is critical to ensure the densifier has fully reacted. Some curing compounds must be mechanically removed before applying secondary coatings to ensure proper adhesion.
A sealer typically creates a film on the surface to block stains, while a densifier chemically changes the concrete to make it harder and dust-proof from within. Densifiers are more permanent and do not peel over time.
Extend the life of your concrete and reduce maintenance costs with the professional surface treatments provided by MCT Chemicals. Our authorized access to global industry leaders ensures your surfaces remain protected and functional, combining the latest in chemical technology with a commitment to quality that ensures every slab, wall, and walkway meets international engineering standards.
Tile Adhesive
High-performance bonding solutions for ceramic, porcelain, and natural stone.
Overview :
The longevity of a tiled surface depends entirely on the quality of the bond between the tile and the substrate. MCT Chemicals provides advanced tiling systems from Sika and Master Builders designed to handle the stresses of thermal expansion, moisture exposure, and heavy mechanical loads. Standard cement-sand mortars often fail under modern construction demands, leading to hollow sounds, cracking, or debonding. Our range of polymer-modified adhesives ensures superior grab and flexibility, whether you are installing large-format porcelain slabs on a high-rise facade or chemical-resistant tiles in an industrial kitchen. By matching the specific adhesive chemistry to the tile type and environment, we ensure a permanent, failure-free installation.
[Image showing the notched trowel application of polymer-modified tile adhesive]
Modern architecture often utilizes non-porous materials like glass mosaics and natural stone, which require specialized bonding agents to achieve a secure fix. Our technical approach focuses on the “thin-bed” method, which provides higher bond strength with less material compared to traditional thick-bed methods. We offer solutions for every challenge, including rapid-setting adhesives for quick-turnover projects and high-deformability (S1/S2) adhesives for substrates subject to vibration or deflection. At MCT Chemicals, we provide the full system—from substrate primers to specialized grouts—ensuring that your tiling project not only looks exceptional but remains structurally sound under the most demanding residential, commercial, or industrial conditions.
Included & Excluded :
- High-Performance Adhesives
- Substrate Priming
- Specialized Grouting
- Tile Supply & Procurement
- Substrate Casting
- General Demolition
Construction management :
Porcelain tiles have extremely low water absorption, meaning regular cement cannot “grip” them. You must use polymer-modified adhesives from Sika or Master Builders that provide a chemical bond rather than just a mechanical one.
Yes. Large-format tiles require “highly deformable” (S1 or S2 rated) adhesives. These allow the tile and substrate to move slightly without the adhesive cracking, which is vital for preventing the tile from popping or breaking.
Absolutely. We offer specialized water-resistant and submerged-grade adhesives and epoxy grouts that are specifically designed to withstand constant water pressure and the harsh chemicals used in pool maintenance.
While standard adhesives require 24 hours, we offer rapid-setting systems that allow for grouting and foot traffic in as little as 3 to 6 hours, which is ideal for retail refurbishments and fast-track projects.
ollow sounds occur when the adhesive is not spread evenly (poor “wetting”) or if the substrate was not properly primed. Using the correct notched trowel and MCT-recommended primers ensures 100% coverage and a solid bond.
Ensure a lifetime of durability for your architectural finishes with the professional tiling systems from MCT Chemicals. Our authorized access to global industry leaders ensures your tiles remain securely bonded and beautifully finished, combining the latest in chemical technology with a commitment to quality that ensures every floor, wall, and submerged surface meets international engineering standards.
Joint Sealants
Precision engineering for flexible, weather-tight, and durable construction joints.
Overview :
Every modern structure is designed with intentional gaps to allow for movement caused by thermal expansion, wind loads, and structural settlement. MCT Chemicals provides high-performance joint sealing solutions from Sika and Master Builders that ensure these gaps remain watertight and airtight throughout the building’s life. Without professional-grade joint sealants, moisture can penetrate the building envelope, leading to interior damage and the degradation of structural components. Our systems utilize advanced polyurethane, silicone, and hybrid technologies to create a flexible barrier that can expand and contract repeatedly without losing adhesion or tearing, even in the most demanding environmental conditions.
Selecting the correct sealant chemistry is vital for the long-term success of any joint. We evaluate factors such as substrate type, expected movement, and exposure to UV or chemicals to recommend the optimal solution. For high-traffic warehouse floors, we provide “traffic-grade” sealants that support joint edges under heavy loads, while for facades, we offer non-staining silicones that maintain architectural aesthetics. At MCT Chemicals, we treat joint sealing as a technical science. Our commitment to quality ensures that every joint—from standard control gaps to complex bridge expansion joints—is treated with world-class materials and precision, protecting your investment from the elements and ensuring long-term structural harmony.
Included & Excluded :
- Elastic Joint Sealing
- Joint Priming & Backing
- Specialized Chemical Sealants
- Structural Crack Injection
- Mechanical Joint Covers
- General Caulking
Construction management :
oint failure is usually caused by using the wrong sealant for the expected movement or failing to use a primer. We use Sika and Master Builders systems designed to handle up to ±50% movement to prevent these failures
A backer rod ensures the sealant is applied at the correct depth and prevents “three-sided adhesion.” This allows the sealant to act like a rubber band, stretching freely as the structure moves without tearing away from the sides.
Yes, we offer specialized polysulfide and high-grade polyurethane sealants that are specifically designed for airports, gas stations, and industrial plants where resistance to jet fuel and oils is a critical requirement.
Polyurethane and hybrid sealants are generally paintable and can be matched to your building’s color. However, pure silicone sealants cannot be painted, so we offer them in a wide range of factory-standard colors.
We use “non-staining” silicone technologies that do not contain the migrating oils found in cheaper products. This ensures that your marble or granite facades remain clean and free from dark “halo” stains around the joints.
Protect the integrity of your structure with the high-performance joint sealing solutions from MCT Chemicals. Our authorized range of global industry leaders ensures your building remains flexible, weather-tight, and secure against environmental stress, combining the latest in chemical technology with a commitment to quality that ensures every joint and connection meets international engineering standards.
Download :
Contractor Profile
Technical CV detailing our specialized application and site expertise.
Download →
Distributor Profile
Authorized credentials for sourcing premium global chemical systems.
Download →
Contact for Services
Expert technical consultations and professional site inspections to ensure superior chemical application for your structural projects.
Download :
Contractor Profile
Technical CV detailing our specialized application and site expertise.
Download →
Distributor Profile
Authorized credentials for sourcing premium global chemical systems.
Download →
Contact for Services
Expert technical consultations and professional site inspections to ensure superior chemical application for your structural projects.