MEmaco 8100 Concrete Repair Mortar | MCT CHEMICALS | MASTER BUILDER SOLUTIONS

USES
MEmaco 8100 AP V1 2x1L 4G is a versatile, fast-setting repair mortar designed for use in:

• Repairing and resurfacing concrete structures
• Patching holes, cracks, and surface imperfections
• Repairing exposed concrete surfaces in industrial and commercial environments
• Suitable for use on floors, walls, and ceilings
• Ideal for use in both indoor and outdoor applications, including areas exposed to light traffic or harsh weather conditions

FEATURES

• Rapid Setting: Quick curing time allows for faster repairs and minimal downtime.
• High Strength: Provides excellent bond strength to concrete and other construction materials.
• Durable: Resistant to abrasion, impact, and harsh weather conditions.
• Easy to Apply: Smooth consistency for easy mixing, application, and finishing.
• Weather and Water Resistant: Performs well in both dry and wet conditions, ensuring long-lasting results.
• Non-Shrink: Ensures no volume loss during the curing process.
• Adhesion to Multiple Substrates: Effective bonding to concrete, stone, and masonry surfaces.

PRODUCT INFORMATION

• Composition: Modified cement-based mortar with advanced polymer additives
• Packaging: Supplied in 2 x 1L containers (2-component system)
• Shelf Life: 12 months from the production date when stored in the original, sealed packaging
• Storage Conditions: Store in a dry, cool place between +5°C and +30°C, away from direct sunlight and moisture.
• Appearance and Color: Grey, with a smooth, paste-like consistency
• Density: Approximately 1.8 kg/L (when mixed)

TECHNICAL INFORMATION

• Compressive Strength:
  • ≥ 30 N/mm² (24 hours at +25°C)
• Tensile Strength:
  • ≥ 8 N/mm² (24 hours at +25°C)
• Flexural Strength:
  • ≥ 10 N/mm² (24 hours at +25°C)
• Application Temperature:
  • Minimum: +5°C / Maximum: +40°C
• Setting Time:
  • Initial set: 15-30 minutes at +25°C
  • Final set: 45 minutes at +25°C
• Water Demand:
  • 20-25% by weight, depending on the consistency required

APPLICATION INFORMATION

• Surface Preparation:
  • Clean and prepare the substrate by removing dust, oil, grease, and loose material. Abrade the surface to ensure proper adhesion of the repair mortar.
• Mixing:
  • Mix the two components (liquid and powder) in the recommended ratio until a smooth, lump-free consistency is achieved.
• Application Method:
  • Apply the mortar using a trowel, spatula, or putty knife, pressing firmly into cracks or holes. Smooth the surface to the desired finish.
• Curing:
  • Allow the repair to set and cure. Protect the area from direct sunlight or rapid temperature changes during the curing period.
• Cleaning:
  • Clean tools and equipment with water immediately after use. Once the product has set, it may be difficult to remove.