MSeal P 101 Universal Silane-Modified Primer | MCTCHEMICALS | MASTER BUILDER SOLUTIONS

USES
Sika® Primer-101 (formerly MSeal P 101) is suitable for preparing both porous and non-porous surfaces, including concrete, brick, stone, asbestos, wood, stainless steel, and ceramics.

CHARACTERISTICS / ADVANTAGES

• Easy to apply
• Low viscosity

PRODUCT INFORMATION

• Chemical Base: 1-component, solvent-based modified silane
• Packaging: 750 ml can
• Shelf Life: 12 months from production date
• Storage Conditions: Store in original, unopened packaging in dry conditions at temperatures between +5°C and +35°C. Protect from direct sunlight, heat, and moisture.
• Color: Clear

TECHNICAL INFORMATION
APPLICATION INFORMATION

• Yield: ~ 20 m²/L (theoretical coverage)
• Ambient Air Temperature: Minimum +5°C / Maximum +40°C, 3°C above dew point
• Substrate Temperature: Minimum +5°C / Maximum +40°C

BASIS OF PRODUCT DATA
All technical information in this data sheet is based on laboratory tests. Actual results may vary due to factors beyond our control.

FURTHER DOCUMENTS

• General Method Statement (GMS)

LIMITATIONS

• Flammable or highly flammable liquids.
• Do not apply near open flames or while smoking.
• Wear protective gloves and goggles. Use in well-ventilated areas and avoid inhaling vapors.
• In case of narcosis from inhaling concentrated vapor, move the person to fresh air and seek medical assistance.
• If the product comes into contact with eyes, rinse thoroughly with clean, cold water for at least five minutes and seek medical attention.
• In case of fire, extinguish using carbon dioxide, dry chemical, or foam fire extinguisher.
• Due to its penetrating and sealing properties, Sika® Primer-101 (formerly MSeal P 101) may cause staining on materials like granite, marble, natural stone, and man-made composites.