Sikafloor® QuartzTop-100 | MTop 100 Grey V1| MCTCHEMICALS | SIKA PAKISTAN

USES

MTop 100 Grey V1 is ideal for a variety of applications, including:

• Concrete and Masonry: Coating and repairing surfaces like walls, floors, and ceilings in both residential and commercial buildings.
• Industrial Environments: Protective coating for floors, walls, and ceilings in factories, warehouses, and workshops.
• Exterior Applications: For use on outdoor structures, providing protection against harsh weather conditions and environmental factors.
• Renovation: Used in the renovation of old concrete surfaces, providing a fresh, durable finish.
• Waterproofing: Can be applied as a part of a waterproofing system for areas prone to moisture.

FEATURES

• Durability: Designed for high abrasion resistance, making it ideal for high-traffic areas.
• Weather Resistance: Offers excellent protection against environmental elements such as rain, UV rays, and temperature fluctuations.
• Aesthetic Appeal: Smooth, uniform grey finish that enhances the visual appeal of the surface.
• High Adhesion: Superior bonding properties ensure long-lasting performance on various surfaces including concrete, plaster, and masonry.
• Non-Shrinking: Ensures a solid, stress-free bond and finish that does not shrink after application.
• Chemical Resistance: Resistant to mild chemicals, oils, and grease, maintaining its integrity in industrial environments.
• Easy Application: Can be applied by brush, roller, or spray, providing flexibility depending on the scale of the project.

PRODUCT INFORMATION

• Product Name: MTop 100 Grey V1
• Appearance: Smooth, matte finish in grey
• Packaging: 25kg bags (available in other sizes upon request)
• Shelf Life: 12 months from date of manufacture if stored in original packaging
• Storage Conditions: Store in a cool, dry environment, away from direct sunlight and extreme temperatures. Ensure the packaging remains sealed to avoid contamination.
• Application Temperature: 5°C to 35°C (41°F to 95°F)
• Mixing Instructions: Mix with water as per product specifications (water-to-powder ratio typically provided on packaging)
• Thinner: Water (if required for adjusting viscosity)

TECHNICAL INFORMATION

• Density: Approximately 1.4 – 1.6 kg/L (depending on application)
• Viscosity: Medium viscosity for ease of application
• Coverage: 1kg covers approximately 2-3 m² depending on surface texture and application thickness
• Drying Time: Touch dry in 1-2 hours; fully dry within 24 hours at 20°C (68°F)
• Curing Time: Fully cured after 7 days under standard conditions
• Compressive Strength: ≥ 30 MPa (after 28 days)
• Flexural Strength: ≥ 7 N/mm² (after 28 days)
• VOC Content: < 50 g/L (Compliant with environmental regulations)

APPLICATION INFORMATION

1. Surface Preparation:
   • Ensure that the surface is clean, dry, and free from any loose particles, dust, oil, or grease.
   • If necessary, use a suitable cleaner or degreaser to remove contaminants before application.
   • For optimal bonding, repair any cracks or surface imperfections before applying the coating.
2. Mixing Instructions:
   • Mix MTop 100 Grey V1 with the recommended amount of clean water to achieve a smooth, lump-free consistency.
   • Adjust the water content slightly if needed to achieve the desired workability.
3. Application Method:
   • Brush or Roller: Apply evenly with a brush or roller for smaller areas or fine finishes.
   • Spray: Use a spray application method for larger surfaces to achieve a smooth and uniform coat.
   • Multiple Coats: Apply multiple coats if necessary, allowing adequate drying time between each coat (typically 4-6 hours).
4. Drying and Curing:
   • Allow the first coat to dry for 1-2 hours before applying the second coat.
   • Full curing is achieved after 7 days under standard conditions.
5. Cleanup:
   • Clean tools and equipment immediately after use with water, before the material dries.
   • Once the coating has dried, solvent-based cleaners may be required for cleanup.
6. Precautions:
   • Always apply in well-ventilated areas to avoid inhaling vapors.
   • Use appropriate personal protective equipment (PPE), such as gloves and safety glasses, during application.