SikaPlast®-400 PK | MCT CHEMICALS | SIKA PAKISTAN

SikaPlast®-400 PK is a polycarboxylate-based superplasticizer, specifically designed for ready-mixed concrete. It provides extended slump retention and promotes high strength development in normal-grade concrete mixes. This product is also suitable for concrete mixes containing pozzolanic materials, including GGBS, PFA, and microsilica. It performs well in both hot and tropical climates.

Applications
SikaPlast®-400 PK is ideal for use in the following types of concrete:

• Ready-mixed concrete
• High-flow concrete
• High-strength concrete
• Slabs
• Foundations
• Walls
• Columns and piers
• Piles
• Pre-stressed concrete
• Bridges and cantilever structures

Characteristics and Advantages
SikaPlast®-400 PK works by adsorbing to cement particles, creating steric hindrance and electrostatic repulsion, which improves the dispersion and flow of the binder particles. This leads to superior slump retention and concrete performance. The following benefits are provided by SikaPlast®-400 PK:

• Significant improvement in workability without increasing the water content.
• Low risk of segregation.
• Normal setting time without retardation (within the recommended dosage).
• Enhanced density and surface finish.
• Improved water-tightness.
• Ideal for continuous concrete casting in deep elements.
• Free from chlorides or other ingredients that may promote steel corrosion.

Approvals and Standards
SikaPlast®-400 PK complies with ASTM C494, Types G and EN 934-2 standards.

Product Information

• Chemical Composition: Aqueous solution of modified polycarboxylates and co-polymers
• Packaging Options:
  • 5-litre jerry can
  • 20-litre plastic can
  • 200-litre drum
  • 1000-litre IBC
  • Bulk supply via tanker available on request
• Shelf Life: 12 months from the production date when stored correctly.
• Storage Conditions: Store in original, sealed packaging in dry conditions at temperatures between +5°C and +45°C. Protect from direct sunlight and frost.
• Appearance: Brown liquid
• Specific Gravity: 1.05 (+25°C)
• Chloride Ion Content: Nil (EN 934-2)

Technical Information

• Concreting Guidance: Standard good concreting practices must be followed during production and placement of concrete. Refer to relevant standards for best practices.
• Curing: Proper curing of fresh concrete is essential, especially in high temperatures, to avoid plastic and drying shrinkage. Use Sika® Antisol® products or wet hessian for curing.

Application Guidelines

• Recommended Dosage: 0.8% to 1.6% by weight of binder. Depending on the mix design, raw materials, and climate conditions, dosages up to 2% by binder weight may be used. Trial mixes are recommended to determine the exact dosage.
• Dispensing: SikaPlast®-400 PK should be added to the gauging water or mixed simultaneously with it in the concrete mixer at the batching plant. Do not add directly to the dry mix. For best results, mix thoroughly for at least 60 seconds to ensure optimal water reduction. The remaining water (to adjust consistency) should be added only after two-thirds of the wet mixing time to prevent excess water in the concrete.
• Compatibility: SikaPlast®-400 PK is compatible with all types of Portland cement (OPC and SRC), as well as concrete mixes containing pozzolanic materials like GGBS, PFA, and microsilica. It is also compatible with other Sika products, including:
  • SikaPump®
  • Sika® FerroGard®-901
  • SikaFume®
  • SikaFiber®
  • SikaAer®
  • Sika® Stabilizer
  • Sika®-1 WT
  • Sika® WT-10
    Trial mixes are advised to determine the correct performance when combining SikaPlast®-400 with other admixtures. Please consult Sika’s Technical Department for guidance.