Sika Swell P Profile |MCT CHEMICALS | SIKA PAKISTAN

Uses
Ideal for sealing:

• Construction joints
• Pipe and steelwork penetrations through walls and floor slabs
• Construction joints in precast concrete
• Construction joints in tunnel segments
• Construction joints in cable ducts
• All types of penetrations through concrete

Characteristics / Advantages

• Simple to apply
• Expands when exposed to water
• Coated with a protective layer to prevent premature swelling
• Water-resistant
• No curing time needed
• Suitable for different substrates
• Flexible enough for various detailing applications
• Available in different types and sizes

Approvals / Standards

• Water tightness: SikaSwell® P-2003, STUVA, Test report No. FSO-KE46

Product Information

• Chemical Base: Red outer layer is a combination of hydrophilic swelling resins and rubber
• Packaging:
  • SikaSwell® P 2003: 7 rolls of 20 m each (140 m total per box)
  • SikaSwell® P 2005: 7 rolls of 20 m each (140 m total per box)
  • SikaSwell® P 2010: 1 roll of 10 m or 5 rolls of 10 m (50 m total per box)
• Appearance / Colour:
  • Mono Types: Plain swelling profiles
  • Highly swellable red profiles
• Shelf Life: 48 months from the production date
• Storage Conditions: Store in original, unopened, and undamaged packaging in dry conditions at temperatures between +5°C and +35°C.

Dimensions

• 2003: Width: 20 mm, Thickness: 3 mm
• 2005: Width: 20 mm, Thickness: 5 mm
• 2010: Width: 20 mm, Thickness: 10 mm
• Custom profiles available upon request

Technical Information

• Shore A Hardness: 45 ± 5 (DIN 53505)
• Tensile Strength: > 1.3 N/mm² (DIN 53504)
• Elongation: > 300% (DIN 53504)
• Volume Change in Standard Water (ISO 1817):
  • 1 Day: > 100%
  • 3 Days: > 200%
  • 7 Days: > 300%
• Volume Change in Sea Water (ISO 1817):
  • 1 Day: > 10%
  • 3 Days: > 20%
  • 7 Days: > 25%
• Swelling Pressure: ≤ 15 bar after 7 days in tap water

System Information

• System Structure: Requires the following system products:
  • SikaSwell® P Profiles
  • SikaSwell® S-2 Sealant

Application Information

• Substrate Moisture Content: Should be dry or slightly damp. Do not apply to joints with standing water.
• Ambient Air Temperature: Minimum +5°C. For installation below +5°C, special measures must be followed per national regulations and Sika guidelines.
• Substrate Temperature: Minimum +5°C. Special measures are required for installation below +5°C, in accordance with relevant national regulations and Sika guidelines.