Sikafloor 261 | MCT CHEMICALS | SIKA PAKISTAN

WHERE TO USE
Sikafloor®-261 CA should be applied by experienced professionals in the following areas:

• Clean rooms and sanitary areas
• Commercial and industrial facilities
• Food service environments
• Institutional and recreational areas
• Light to medium-duty manufacturing spaces
• Processing and storage facilities
• Retail stores
• Theaters
• Aircraft hangars

CHARACTERISTICS / ADVANTAGES

• Strong mechanical and chemical resistance
• Glossy finish that enhances aesthetic appeal
• Durable, seamless, and impermeable surface
• Easy to clean and maintain
• Prevents bacterial and fungal growth
• Neutral odor
• Wide range of colors available, with no minimum order required
• High resistance to fungi (ASTM G21) and mold growth (ASTM D3273)

ENVIRONMENTAL INFORMATION

• Conforms to LEED®v4 MR Credit (Option 1): Environmental Product Declarations
• Meets LEED®v4 EQ Credit: Low-Emitting Materials
• Complies with LEED®v4 MR Credit (Option 2): Material Ingredients and Sourcing of Raw Materials

APPROVALS / CERTIFICATES

• Meets CFIA and USDA requirements for use in food plants

PRODUCT INFORMATION

• Packaging: Available in 10 L and 30 L (2.6 and 7.9 US gal.) units
• Shelf Life: 2 years when stored in unopened packaging
• Storage Conditions: Store in a dry environment at temperatures between 5°C and 32°C (41°F to 89°F)
• Appearance/Color: RAL 7038 Agate Grey, RAL 7030 Stone Grey, RAL 7046 Telegrey 2, RAL 7012 Basalt Grey (custom colors available upon request)
• Viscosity: ~550 cps (A+B mixed)
• VOC Content: < 50 g/L

TECHNICAL INFORMATION

• Shore D Hardness: ~76 (ASTM D2240)
• Abrasion Resistance: ~0.11 g (CS17/1000 cycles, 1000 g) (ASTM D4060)
• Impact Resistance: ~5.88 joules (ASTM D2794)
• Indentation: ~8.82% (MIL-PRF-24613)
• Compressive Strength: ~56 MPa (ASTM D695)
• Tensile Strength: ~7.4 MPa (ASTM D638)
• Elongation at Break: ~22% (ASTM D638)
• Pull-Off Strength: > 2.5 MPa (ASTM D7234)
• Thermal Expansion: ~1.27 x 10^-4 mm/mm/°C (ASTM D696)
• Friction Coefficient: ~0.32 wet, ~0.93 dry (ANSI A137.1 / ANSI A326.3)
• Service Temperature: Minimum 0°C (32°F), Maximum 50°C (122°F)
• Water Absorption: ~0.3% (ASTM D570)
• Fire Resistance: 0 (FSR) Flame Spread Rating, 15 (SDC) Smoke Development Classification (CAN/ULC S102.2)

APPLICATION INFORMATION

• Mixing Ratio: A:B = 2:1 by volume
• Consumption:
  • Prime coat: 5 m²/L to 8 m²/L (200 ft²/US gal. to 325 ft²/US gal.) at 5-8 mils WFT
  • Wear coat: 1.6 m²/L to 3.3 m²/L (65 ft²/US gal. to 135 ft²/US gal.) at 12-25 mils WFT
  • Refresher coat: Apply at the same rate as wear coat
• Product Temperature: Condition product between 18°C to 30°C (65°F to 86°F) before use
• Ambient Air Temperature: Minimum 10°C (50°F), Maximum 30°C (85°F)
• Relative Air Humidity: Maximum 85% during application and curing
• Substrate Temperature: Minimum 10°C (50°F), Maximum 30°C (85°F)
• Pot Life:
  • At 10°C (50°F): ~60 minutes
  • At 20°C (68°F): ~40 minutes
  • At 30°C (86°F): ~15 minutes
• Open Time on Substrate:
  • At 10°C (50°F): ~80 minutes
  • At 20°C (68°F): ~50 minutes
  • At 30°C (86°F): ~35 minutes