Skip to content
Get a Quotation
Sikafloor 305 W ESD - Flooring | MCT Chemicals
Flooring · PU flooring

Sikafloor®-305 W ESD

Sika TDS On demand
Available on order Not held in stock. Ask us for the current lead time and minimum order.
Brand
Sika
Packing
Part A8.5 kg containers Part B1.5 kg containers Part A+B10.0 kg ready to mix units
  • Very low VOC emissions Very low VOC emissions.
  • Water based Water based.
  • Easy to apply Easy to apply.
  • Easy to refurbish Easy to refurbish, can be over coated directly with itself Very low odour.
  • Good UV resistance Good UV resistance, non-yellowing.
Download Technical Data Sheet (PDF) Request MSDS
Request a quotation Get price on WhatsApp

Prices are quoted per project — no prices are shown online.

  • Sika products supplierIslamabad & Rawalpindi.
  • Get a quote on WhatsAppSend your product and quantity for current pricing.
  • Technical support from MCTOur team helps you choose the right solution.
  • DeliveryContact our team to confirm delivery and lead times to your location.

Product at a glance

Pot life
TemperaturesTime +10 °C~ 50 minutes +20 °C~ 40 minutes +30 °C~ 20 minutes Caution: The end of the pot-life is not noticeable; the viscosity will increase only slightly!
Temperature range
+10 °C min. / +30 °C max.

Key benefits

  • Very low VOC emissions
  • Water based
  • Easy to apply
  • Easy to refurbish
  • Good UV resistance
  • Easy to clean
  • In accordance with general ESD requirements
  • Matt surface

Sikafloor®-305 W ESD

Sikafloor®-305 W ESD is a two part water based, low VOC, polyurethane, coloured matt ESD seal coat.

Recommended uses

  • Sikafloor®-305 W ESD may only be used by experienced professionals. Sikafloor®-305 W ESD is used as matt coloured ESD seal coat for Sikafloor® epoxy and PUR flooring systems.
Technical information

Technical information

Verified performance data for Sikafloor®-305 W ESD, taken directly from the Sika Pakistan Product Data Sheet.

Sikafloor®-305 W ESD — technical data
Chemical BasePUR
Appearance / ColourSikafloor®-305 W ESD is matt after final curing. Available in a limited number of colour shades such as RAL 1000, 1001, 1002, 1011, 3012, 5024, 6021, 6034, 7011, 7032, 7035, 7038, 7040, 7042, 7044, 7047, 9018. Be aware t
DensityPart A~ 1.36 kg/l Part B~ 1.15 kg/l Mixed resin (diluted with 10% water) ~ 1.30 kg/l (DIN EN ISO 2811–1) All density values at +23 °C
Abrasion Resistance~ 119 mg (CS10/1000/1000) (DIN 53 109 (Taber Abraser Test)) Electrostatic Behaviour Resistance to ground 1) R g < 10
ConsumptionPRODUCT DATA SHEET Sikafloor®-305 W ESD March 2023, Version 09.02 020812060030000005 These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in leve
Ambient Air Temperature+10 °C min. / +30 °C max.
Relative Air HumidityDuring curing the humidity should not exceed 75 % max. Adequate fresh air ventilation or a dehumidifier must be provided to remove the excess moisture from the curing product.
Dew PointBeware of condensation. The substrate and uncured floor must be at least 3°C above the dew point to reduce the risk of condensation or blooming on the floor finish.
Substrate Temperature+10°C min. / +30°C max.
Pot LifeTemperaturesTime +10 °C~ 50 minutes +20 °C~ 40 minutes +30 °C~ 20 minutes Caution: The end of the pot-life is not noticeable; the viscosity will increase only slightly!
CuringTime Before overcoating Sikafloor®-305 W ESD allow: Substrate temperatureMinimumMaximum +10 °C2 days10 days +20 °C1 day8 days +30 °C16 hours7 days Based on RH max. 70 % and good ventilation. Times are approximate and wil
StandardsSynthetic resin screed material according to EN 13813:2002, Declaration of Performance 0208120600300000051008, certified by Factory Production Control Body 0921 and provided with the CE mark. Coating for concrete protect

Source: Sika Pakistan Product Data Sheet, Sikafloor®-305 W ESD (March 2023, Version 09.02).

Packaging & storage

Packaging & storage

Packaging

Part A8.5 kg containers Part B1.5 kg containers Part A+B10.0 kg ready to mix units

Storage

The packaging must be stored properly in original, unopened and undamaged sealed packaging, in dry conditions at temperatures between +5°C and +30°C.

Shelf life

Part A: 7 months from date of production Part B: 12 months from date of production

Application guide

Application guide (3 easy steps)

  1. Mixing / DosingRatio Part A: part B + H 2 O = 85: 15: 10 (by weight) ~0.18–0.20 kg/m²/layer
  2. ApplicationPlease refer to Sika Method Statement: “MIXING & APPLICATION OF FLOORING SYSTEMS”. SUBSTRATE QUALITY / PRE-TREATMENT The surface must be clean, dry and free of all contaminants such as dirt, oil, grease, coatings and surface treatments, etc. All dust, loose and friable material must be completely removed from all surfaces before application of the product, preferably by vacuum. Pull off strength shall not be less tha
  3. Cleaning of ToolsClean all tools and application equipment with water immediately after use. Hardened and/or cured material can only be removed mechanically. MAINTENANCE To maintain the appearance of the floor after application, Sikafloor®-305 W ESD must have all spillages removed immediately and be regularly cleaned. Please refer to the “Sikafloor®- CLEANING REGIME”.

Follow the official Sika Technical Data Sheet for full application details.

Technical documents

Data sheets for this product

Technical Library
PDF
Sikafloor®-305 W ESDProduct Data Sheet · March 2023, Version 09.02
1121 KB PDF

More data sheets in Flooring

FAQs

Frequently asked questions

What is Sikafloor®-305 W ESD?

Sikafloor®-305 W ESD is a two part water based, low VOC, polyurethane, coloured matt ESD seal coat.

What packaging is available?

Part A8.5 kg containers Part B1.5 kg containers Part A+B10.0 kg ready to mix units

What is the shelf life?

Part A: 7 months from date of production Part B: 12 months from date of production The packaging must be stored properly in original, unopened and undamaged sealed packaging, in dry conditions at temperatures between +5°C and +30°C.

Reviews

There are no reviews yet.

Be the first to review “Sikafloor®-305 W ESD”

Your email address will not be published. Required fields are marked *

Quotation

Request a quotation for Sikafloor®-305 W ESD

Tell us the quantity and the site. We reply with price, lead time and the right pack size.

Get price on WhatsApp

We use these details only to prepare your quotation and confirm availability. Prefer to talk? Call +92 300 5254439.

Technical advice

Need technical advice or current price?

Our team helps contractors and specifiers choose the right Sika solution and quote current pricing.

Chat on WhatsApp +92 300 5254439No prices are shown online — every quotation is prepared for the project.

Consult to Place Order