USES
SikaMur® InjectoCream-100 is suitable for treating rising damp in nearly all types of masonry walls, including:
- Solid brick walls
- Cavity walls
- Stone walls and rubble infill walls, among others.
CHARACTERISTICS / ADVANTAGES
- Simple installation: Minimal risk of operator error and less reliance on skill levels.
- Ready-to-use, one-component product.
- Fast application: No double drilling or waiting for materials to penetrate under pressure or gravity.
- No need for preliminary sealing around injection holes, unlike pressure systems.
- Quick injection process: No need to wait for material to be pumped, as in pressure systems, and no refilling required as with gravity-fed methods.
- Consistent application rate: Allows accurate calculation of the required material.
- No specialized pump needed.
- Minimal mess and spillage: Reduces the risk of fluid flooding into adjacent areas.
- Highly concentrated formula: Contains around 80% active ingredients, ensuring more effective results compared to less concentrated alternatives.
- Low hazard: Water-based, non-caustic, non-flammable, and not injected under pressure.
- Low wastage: Results in minimal waste disposal.
- No risk of increased efflorescence as with siliconate-based treatments for rising damp.
APPROVALS / STANDARDS
- Certified for rising damp treatment in masonry by the Belgium Building Research Institute (Report ref. BE 407-695-057, dated July 6, 2009).
- Tested according to WTA Guideline 4-4-04/D, Report No. M 1954/1, dated June 24, 2014.
PRODUCT INFORMATION
- Chemical Base: Silane-based emulsion.
- Packaging: 600 ml sausages (boxes of 10 sausages) or 300 ml cartridges (boxes of 12 cartridges).
- Colour: White.
- Shelf Life: 12 months if stored properly in unopened, undamaged packaging.
- Storage Conditions: Store in a dry area at temperatures between +5 °C and +35 °C, protected from direct sunlight and humidity.
- Density: ~0.90 kg/l at 20 °C.
APPLICATION INFORMATION
- Consumption Estimates: The amount of product required depends on the wall’s length and thickness. Example consumption rates are provided below:
- 10m long wall: For 110 mm thick walls, use 1.5 sausages (or 3 cartridges).
- 20m long wall: For 110 mm thick walls, use 3.0 sausages (or 6 cartridges).
- Always allow for an extra 10% material to account for variations in site conditions.
- Ambient Temperature: Between +5 °C and +35 °C. Injection should be done when the temperature is not expected to drop below 0 °C for at least 48 hours after application for optimal diffusion.
Reviews
There are no reviews yet.