Skip to content
Construction Chemicals & Specialty Systems · Anchoring adhesives

Sika AnchorFix 3+

High-Performance Epoxy Anchoring Adhesive

Sika TDS Special order
Special order Supplied to order only. Minimum quantities and lead times apply.
Brand
Sika
Packing
Coaxial cartridge (refer to current packaging / price list)
  • High Load Capacity High-performance epoxy for heavy-duty anchoring.
  • Cracked & Uncracked Approved for cracked and uncracked concrete.
  • Rebar Anchoring Anchoring product for reinforcing steel to EN 1504-6.
  • Solvent-Free Two-component, solvent-free, low odour.
  • CE Marked ETA-14/0125 to ETAG 001 Part 1 & 5.

Price on request — quoted per project.

  • Sika products supplierIslamabad & Rawalpindi.
  • Get a quote on WhatsAppSend your product and quantity for current pricing.
  • Technical support from MCTOur team helps you choose the right solution.
  • DeliveryContact our team to confirm delivery and lead times to your location.

Product at a glance

Application thickness
5 mm max. Sag Flow Non-sag, even overhead
Temperature range
(ETAG 001, Part 5) Long term -40 °C min. / +50°C Short term (1–2 hours) +50 °C

Key benefits

  • High Load Capacity
  • Cracked & Uncracked
  • Rebar Anchoring
  • Solvent-Free
  • CE Marked
  • Versatile Substrates

Sika AnchorFix®-3+ — High-Performance Epoxy Anchoring Adhesive

Sika AnchorFix®-3+ is a high-performance, two-component, solvent-free epoxy anchoring adhesive for heavy-duty anchoring of threaded rods, rebar and bolts into concrete and masonry. It is a bonded injection-type anchor CE-marked to ETAG 001 (ETA-14/0125) and an anchoring product for reinforcing steel bar to EN 1504-6, offering high load capacity, low odour and reliable performance in cracked and uncracked concrete.

Recommended uses

  • Anchoring threaded rods and bolts
  • Rebar post-installation (starter bars)
  • Heavy-duty structural fixings
  • Anchoring in concrete and solid masonry
  • Safety-relevant and high-load connections

Tags

Technical information

Technical information

Verified performance data for Sika AnchorFix®-3+, taken directly from the Sika Pakistan Product Data Sheet.

Sika AnchorFix®-3+ — technical data
Appearance / ColourComponent A clear / translucent Component B grey Component A+B mixed light grey
Shelf Life12 months from date of production All cartridges have the expiry date printed on the label
Storage ConditionsStored properly in original, unopened, sealed and undamaged packaging in dry conditions at temperatures between +5 °C and +30 °C. Protect from direct sunlight
DensityComponent A ~1.18 kg/l Component B ~1.71 kg/l Component A+B mixed ~1.45 kg/l
Service Temperature(ETAG 001, Part 5) Long term -40 °C min. / +50°C Short term (1–2 hours) +50 °C
Layer Thickness5 mm max. Sag Flow Non-sag, even overhead
Product Temperaturemust be at a temperature of between +5 °C and +30 °C for application
Ambient Air Temperature0 °C min. / +40 °C max. Dew Point Beware of condensation. Substrate temperature during application must be at least 3 °C above dew point
Substrate Temperature0 °C min. / +40 °C max

Technical data: refer to the latest official Sika Pakistan Product Data Sheet, available on request.

Packaging & storage

Packaging & storage

Packaging

Coaxial cartridge (refer to current packaging / price list)

Storage

Store in undamaged, unopened, original sealed packaging in dry conditions. The expiry date is printed on each cartridge. Refer to the PDS for exact storage temperature and shelf life.

Application guide

Application guide (5 easy steps)

  1. Drill & Clean the HoleDrill the hole to the specified diameter and depth. The hole must be clean, dry and free from dust, oil and grease. Remove all loose particles by blowing and brushing as required.
  2. Prepare the CartridgeFit the correct static mixer nozzle. The product and substrate must be within the permitted temperature range (+5 C to +30 C); substrate at least 3 C above dew point. Discard the initial mortar until an even colour is achieved.
  3. InjectInject the adhesive from the bottom of the hole, slowly withdrawing the nozzle to avoid air voids, filling to the required level.
  4. Set the AnchorInsert the cleaned rod or rebar with a slight twisting motion to the required depth within the open time, ensuring the annular gap is filled.
  5. Cure & LoadDo not disturb until the specified curing time has elapsed; allow full cure before applying load. Curing times depend on temperature.

Follow the official Sika Technical Data Sheet for full application details.

Technical documents

Data sheets for this product

Technical Library
PDF
Sika AnchorFix®-3+Product Data Sheet · May 2021, Version 01.01
1194 KB PDF

More data sheets in Sealing & Bonding

FAQs

Frequently asked questions

What is Sika AnchorFix®-3+?

A high-performance, two-component epoxy anchoring adhesive for heavy-duty anchoring of rods, bolts and rebar in concrete and masonry.

Is it suitable for rebar?

Yes, it is an anchoring product for reinforcing steel bar to EN 1504-6.

What is the application temperature?

The product and substrate must be between +5 C and +30 C, with the substrate at least 3 C above dew point.

Does the hole need special preparation?

Yes, the hole must be clean, dry and free of dust, oil and grease for full load capacity.

Where are the full technical specifications?

Detailed load and cure data are in the current official Sika Pakistan Product Data Sheet, available on request.

Reviews

There are no reviews yet.

Be the first to review “Sika AnchorFix 3+”

Your email address will not be published. Required fields are marked *

Quotation

Request a quotation for Sika AnchorFix®-3+

Tell us the quantity and the site. We reply with price, lead time and the right pack size.

We use these details only to prepare your quotation and confirm availability. Prefer to talk? Call +92 300 5254439.

Technical advice

Need technical advice or current price?

Our team helps contractors and specifiers choose the right Sika solution and quote current pricing.

Chat on WhatsApp +92 300 5254439Every quotation is prepared for the project.

Consult to Place Order