SikaCeram®-850 Design

Tiles must be firmly fixed and the joints clean, dry and free of dust, adhesive residues and loose material to the full depth of the joint.

Insert the double side-by-side cartridge into a suitable cartridge gun, attach the static mixer nozzle and dispense until both components emerge uniformly mixed. Discard the initial mixed material as instructed on the packaging.

Apply the mixed epoxy grout into the joints (joint width range 2-15 mm), pressing firmly to fully fill the joint on floor and wall tiling.

Tool the joints and clean off excess epoxy from the tile face while still fresh, following the cleaning method and waiting times on the current product packaging. Cured epoxy can only be removed mechanically.

Allow the grout to cure as directed. Note that higher temperatures reduce, and lower temperatures increase, the waiting and cure times.