Skip to content
Flooring · Epoxy flooring

Sikafloor®-220 W Conductive

Sika TDS On demand
Available on order Not held in stock. Ask us for the current lead time and minimum order.
Brand
Sika
Packing
Part A4,98 kg containers Part B1,02 kg containers Part A + B6 kg unipacks
  • Highly electrostatic conductive Highly electrostatic conductive.
  • Easy application Easy application.
  • Economical in use Economical in use.

Prices are quoted per project — no prices are shown online.

  • Sika products supplierIslamabad & Rawalpindi.
  • Get a quote on WhatsAppSend your product and quantity for current pricing.
  • Technical support from MCTOur team helps you choose the right solution.
  • DeliveryContact our team to confirm delivery and lead times to your location.

Product at a glance

Pot life
TemperaturesTime +10 °C~120 minutes +20 °C~90 minutes +30 °C~30 minutes
Temperature range
+10 °C min. / +30 °C max.

Key benefits

  • Highly electrostatic conductive
  • Easy application
  • Economical in use

Sikafloor®-220 W Conductive

Sikafloor®-220 W Conductive is a two part, water dispersed, epoxy resin with a high electrostatic conductivity. Sikafloor®-220 W Conductive is a part of different systems. For more details please refer to the System Data Sheet mentioned under the parapraph SYS- TEM INFORMATION.

Recommended uses

  • Sikafloor®-220 W Conductive may only be used by experienced professionals.
  • Sikafloor®-220 W Conductive shall be used by professional applicators only.
  • Sikafloor®-220 W Conductive must be applied as conductive primer underneath all Sikafloor® conductive wearing courses, such as Sikafloor®-262 AS N, 262 AS N Thixo, -235 ESD, -269 ECF CR, -381 ECF and -390 ECF.
  • Electrostatic conductive coatings on concrete and cementitious screeds for different types of industrial use.
Technical information

Technical information

Verified performance data for Sikafloor®-220 W Conductive, taken directly from the Sika Pakistan Product Data Sheet.

Sikafloor®-220 W Conductive — technical data
Chemical BaseWaterborne epoxy
Appearance / ColourResin - part Ablack, liquid Hardener - part Bwhite, liquid
DensityPart A1,15 kg/l Part B1,06 kg/l Mixed Resin1,04 kg/l (DIN EN ISO 2811–1) All density values at +23 °C. Solid content by weight ~44 % Solid content by volume
Consumption~0,08–0,10 kg/m² These figures are theoretical and does not allow for any additional material due to surface porosity, surface profile, variations in level and wastage etc. For detailed info, please refer to the system r
Ambient Air Temperature+10 °C min. / +30 °C max.
Relative Air Humidity75 % r.h. max.
Dew PointBeware of condensation! The substrate and uncured floor must be at least 3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.
Substrate Temperature+10 °C min. / +30 °C max.
Substrate Moisture Content< 4 % moisture content. Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet).
Pot LifeTemperaturesTime +10 °C~120 minutes +20 °C~90 minutes +30 °C~30 minutes
CuringTime Before overcoating Sikafloor®-220 W Conductive allow: Substrate temperatureMinimumMaximum +10 °C26 hours7 days +20 °C17 hours5 days +30 °C12 hours4 days Times are approximate and will be affected by changing ambient
StandardsCE Marking and Declaration of Performance to EN 1504–2 - Surface protection product for concrete - Coating CE Marking and Declaration of Performance to EN 13813 - Resin screed material for internal use in buildings Varni

Source: Sika Pakistan Product Data Sheet, Sikafloor®-220 W Conductive (December 2022, Version 04.02).

Packaging & storage

Packaging & storage

Packaging

Part A4,98 kg containers Part B1,02 kg containers Part A + B6 kg unipacks

Storage

aged sealed packaging, in dry conditions at temperatures between +5 °C and +30 °C. Part A and part B must be protected from frost.

Shelf life

12 months from date of production. The packaging must be stored properly in original, unopened and undam-

Application guide

Application guide (3 easy steps)

  1. Mixing / DosingRatio Part A: part B = 83: 17 (by weight)
  2. Applicationof Sikafloor® conductive primer: Uniformly spread 1 × Sikafloor®-220 W Conductive using a short pile nylon roller (12 mm).
  3. Cleaning of ToolsClean all tools and application equipment with water immediately after use. Hardened and/or cured material can only be removed mechanically.

Follow the official Sika Technical Data Sheet for full application details.

Technical documents

Data sheets for this product

Technical Library
PDF
Sikafloor®-220 W ConductiveProduct Data Sheet · December 2022, Version 04.02
1094 KB PDF

More data sheets in Flooring

FAQs

Frequently asked questions

What is Sikafloor®-220 W Conductive?

Sikafloor®-220 W Conductive is a two part, water dispersed, epoxy resin with a high electrostatic conductivity.

What packaging is available?

Part A4,98 kg containers Part B1,02 kg containers Part A + B6 kg unipacks

What is the shelf life?

12 months from date of production. The packaging must be stored properly in original, unopened and undam- aged sealed packaging, in dry conditions at temperatures between +5 °C and +30 °C. Part A and part B must be protected from frost.

Reviews

There are no reviews yet.

Be the first to review “Sikafloor®-220 W Conductive”

Your email address will not be published. Required fields are marked *

Quotation

Request a quotation for Sikafloor®-220 W Conductive

Tell us the quantity and the site. We reply with price, lead time and the right pack size.

We use these details only to prepare your quotation and confirm availability. Prefer to talk? Call +92 300 5254439.

Technical advice

Need technical advice or current price?

Our team helps contractors and specifiers choose the right Sika solution and quote current pricing.

Chat on WhatsApp +92 300 5254439No prices are shown online — every quotation is prepared for the project.

Consult to Place Order