Image on request
Concrete Repair & Protection · Concrete protection
Sika® FerroGard®-903 Plus
Active corrosion inhibitor for reinforced concrete
Sika TDS On demand
View product & data sheet Get price on WhatsApp
Concrete Repair & Protection · Concrete protection
Sikagard®-720 EpoCem®
Sika TDS On demand
Available on order Not held in stock. Ask us for the current lead time and minimum order.
- Improved chemical resistance compared to Improved chemical resistance compared to PCC mortars Good protection of concrete in aggressive environments Waterproof.
- Vapour permeable Vapour permeable.
- Application range 0 Application range 0,5–3 mm on vertical and horizontal surfaces Good adhesion to damp or dry concrete.
- Fast overcoating of Sika® resin-based Fast overcoating of Sika® resin-based finish products.
- Good surface finishing Good surface finishing.
Prices are quoted per project — no prices are shown online.
- Sika products supplierIslamabad & Rawalpindi.
- Get a quote on WhatsAppSend your product and quantity for current pricing.
- Technical support from MCTOur team helps you choose the right solution.
- DeliveryContact our team to confirm delivery and lead times to your location.
Product at a glance
Application thickness
Temporary moisture barrier (TMB): 2,0 mm minimum Pore filling, repair and levelling: 0,5 mm min. / 3,0 mm max. Pore filling and repairing small areas: (< 0.01 m 2 ) 5,0 mm max
Pot life
TemperatureTime +10 °C~80 minutes +20 °C~40 minutes +30 °C~20 minutes 21 kg unit
Temperature range
-30 °C min. / +80 °C max. for continuous exposure.
Key benefits
- Improved chemical resistance compared to
- Vapour permeable
- Application range 0
- Fast overcoating of Sika® resin-based
- Good surface finishing
- Does not require overcoating
- Manual and machine application
Sikagard®-720 EpoCem®
Sikagard®-720 EpoCem® is a 3-part, epoxy modified, cementitious, fine textured mortar for levelling and finishing concrete, mortar or stone surfaces.
Recommended uses
- Sikagard®-720 EpoCem® may only be used by experienced professionals. Thin layer render
- Concrete pore filler/ levelling mortar
Technical information
Technical information
Verified performance data for Sikagard®-720 EpoCem®, taken directly from the Sika Pakistan Product Data Sheet.
| Chemical Base | Epoxy modified cementitious mortar |
|---|---|
| Appearance / Colour | Part A-resinwhite liquid Part B - hardenertransparent yellow liquid Part C - filleraggregate powder Finished colour~grey |
| Density | Part A~1,05 kg/l Part B~1,03 kg/l Resin mixed~1,30 kg/l Parts A+B+C mixed~2,00 kg/l (EN 1015–6) All density values at +20 °C |
| Product Declaration | Complies with the general requirements of EN 1504–3: Class R4. EN 1504–2: Surface protection product for concrete - Coating. |
| Compressive Strength | > 45 N/mm 2 (28 days / +20 °C / 50 % r.h) (EN 1504–3: Class R4) (EN196–1) |
| Tensile Strength | in Flexure > 5 N/mm 2 (28 days / +20 °C / 50 % r.h) (EN196–1) |
| Coefficient of Thermal Expansion | ~13 × 10 –6 1/K |
| Reaction to Fire | Class A2(fl) S1 (EN 13501–1) Freeze Thaw De-Icing Salt Resistance Resistance Factor WFT–99 % (High) (EN196–1) Sulfate Resistance High Sulphate Resistance (ASTM C 1012) |
| Service Temperature | -30 °C min. / +80 °C max. for continuous exposure. |
| Consumption | ~2,0 kg/m 2 /mm This figure is theoretical and does not allow for any additional material required due to surface porosity, surface profile, variations in level or wastage, etc. |
| Layer Thickness | Temporary moisture barrier (TMB): 2,0 mm minimum Pore filling, repair and levelling: 0,5 mm min. / 3,0 mm max. Pore filling and repairing small areas: (< 0.01 m 2 ) 5,0 mm max |
| Ambient Air Temperature | +8 °C min. / +30 °C max. |
| Substrate Temperature | +8°C min. / +30°C max. |
| Pot Life | TemperatureTime +10 °C~80 minutes +20 °C~40 minutes +30 °C~20 minutes 21 kg unit |
| Waiting Time / Overcoating | Once Sikagard®-720 EpoCem® is tack free it is possible to apply vapour permeable resin finishes. For the application of vapour tight resin finishes on Sikagard®-720 Epo- Cem®, allow the surface moisture to fall below 4 % |
| Curing Treatment | TemperatureFull cure +10 °C~14 days +20 °C~7 days +30 °C~4 days Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity. |
| Standards | CE Marking and Declaration of Performance to EN 1504–2 - Surface protection product for concrete - Coating CE Marking and Declaration of Performance to EN 1504–3 - Concrete repair product for structural repair Suitabilit |
Source: Sika Pakistan Product Data Sheet, Sikagard®-720 EpoCem® (May 2021, Version 02.01).
Packaging & storage
Packaging & storage
Packaging
Pre-batched 21 kg sets. Part A1,14 kg container Part B2,86 kg container Part C17 kg bags Refer to current price list for packaging variations
Storage
The product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packaging.
Shelf life
Part A and Part B12 months from date of production Part CConfirmed by producing company
Application guide
Application guide (2 easy steps)
- Applicationequipment: TMB Mixed material carrier Pin leveller▪ Trowels▪ Spiked roller▪ Manual application equipment: Pore filling, repair and levelling Mixed material carrier▪ Plasterers hawk▪
- Cleaning of ToolsClean all tools and application equipment with water immediately after use. Hardened material can only be mechanically removed.
Follow the official Sika Technical Data Sheet for full application details.
Technical documents
Data sheets for this product
More data sheets in Concrete Repair & Protection · Waterproofing
FAQs
Frequently asked questions
What is Sikagard®-720 EpoCem®?
Sikagard®-720 EpoCem® is a 3-part, epoxy modified, cementitious, fine textured mortar for levelling and finishing concrete, mortar or stone surfaces.
What packaging is available?
Pre-batched 21 kg sets. Part A1,14 kg container Part B2,86 kg container Part C17 kg bags Refer to current price list for packaging variations
What is the shelf life?
Part A and Part B12 months from date of production Part CConfirmed by producing company The product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packaging.
What compressive strength does it reach?
> 45 N/mm 2 (28 days / +20 °C / 50 % r.h) (EN 1504–3: Class R4) (EN196–1)
Related products
Related products
Image on request
Concrete Repair & Protection · Concrete protection
Sika® Permacor®-3326 EG H
Sika® Permacor®-3326 EG H is a low solvent containing 2-pack epoxy coating for steel and concrete.
Sika TDS On demand
View product & data sheet Get price on WhatsApp
Concrete Repair & Protection · Concrete protection
Sikagard® PW
Sikagard® PW is a two component, solvent free epoxy coating with outstanding mechanical and chemical properties.
Sika TDS On demand
View product & data sheet Get price on WhatsApp
Image on request
Concrete Repair & Protection · Concrete protection
Sikagard®-307 W
Sikagard®-307 W is a single component waterborne polyurethane based coating, designed with specific hygiene functionality.
Sika TDS On demand
View product & data sheet Get price on WhatsApp
Quotation
Request a quotation for Sikagard®-720 EpoCem®
Tell us the quantity and the site. We reply with price, lead time and the right pack size.
Technical advice
Need technical advice or current price?
Our team helps contractors and specifiers choose the right Sika solution and quote current pricing.
Chat on WhatsApp +92 300 5254439No prices are shown online — every quotation is prepared for the project.
Reviews
There are no reviews yet.