Sealants · Joint Sealants
Sikaflex® Construction
One-Component Polyurethane Construction Joint Sealant
Sika In stock
View product & data sheet Get price on WhatsApp
Sealants · Waterstops / swellable seals
SikaSwell® P Profiles
Sika TDS On demand
Available on order Not held in stock. Ask us for the current lead time and minimum order.
- Easy to apply Easy to apply.
- Swells in contact with water Swells in contact with water.
- Coated with protective layer to Coated with protective layer to avoid premature swelling Water resistant.
- No hardening time required No hardening time required.
- Can be applied on different substrates Can be applied on different substrates.
Prices are quoted per project — no prices are shown online.
- Sika products supplierIslamabad & Rawalpindi.
- Get a quote on WhatsAppSend your product and quantity for current pricing.
- Technical support from MCTOur team helps you choose the right solution.
- DeliveryContact our team to confirm delivery and lead times to your location.
Product at a glance
Temperature range
+5 °C min. For installation below +5 °C ambient temperature, special measures are required in accordance with relevant national regulations and Sika guidelines
Key benefits
- Easy to apply
- Swells in contact with water
- Coated with protective layer to
- No hardening time required
- Can be applied on different substrates
- Adaptable to fit many different
- Different types and dimensions available
SikaSwell® P Profiles
Sealing profiles which swell in contact with water to seal all types of joints and penetrations in concrete.
Recommended uses
- To seal: Construction joints
- Pipe and steel work penetrations through walls and floor slabs Construction joints in precast concrete
- Construction joints in tunnel segments
- Construction joints in cable ducts, etc.
- Around all types of penetrations through concrete
Technical information
Technical information
Verified performance data for SikaSwell® P Profiles, taken directly from the Sika Pakistan Product Data Sheet.
| Chemical Base | Red outer layer: Combination of hydrophilic swelling resins and rubber |
|---|---|
| Appearance / Colour | Mono Types: Plain section swelling profiles▪ Highly swellable red profiles▪ |
| Shore A Hardness | 45 ± 5 (DIN 53505) |
| Tensile Strength | > 1,3 N/mm 2 (DIN 53504) Elongation > 300 % (DIN 53504) Change of Volume Volume change in Standard Water (according to ISO 1817) |
| Substrate Moisture Content | Dry or matt damp. Do not apply in construction joints when standing water is existing. |
| Ambient Air Temperature | +5 °C min. For installation below +5 °C ambient temperature, special measures are required in accordance with relevant national regulations and Sika guidelines |
| Substrate Temperature | +5 °C min. For installation below +5 °C substrate temperature, special measures are required in accordance with relevant national regulations and Sika guidelines |
| Standards | Water Tightness SikaSwell® P-2003, STUVA, Test report No. FSO-KE46 |
Source: Sika Pakistan Product Data Sheet, SikaSwell® P Profiles (May 2021, Version 01.01).
Packaging & storage
Packaging & storage
Packaging
SikaSwell® P 20037 × 20 m = 140 mBox with 7 rolls SikaSwell® P 20057 × 20 m = 140 mBox with 7 rolls SikaSwell® P 20101 × 10 m = 10 m, 5 × 10 m = 50 m Box with 1 or 5 rolls Refer to current price list for packaging variations.
Storage
The product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +35 °C. Always refer to packaging. Dimensions TypeWidth mm Thickness mm
Shelf life
48 months from date of production
Application guide
Application guide (2 easy steps)
- ApplicationSUBSTRATE QUALITY The substrate must be sound, clean, dry or matt-damp and free from all surface contaminants SUBSTRATE PREPARATION Existing concrete All loose particles, release agents, laitance, paint, rust and other poorly adhering materials must be removed by suitable hand or mechanical preparation. Freshly cast concrete Note:Surfaces which are excessively rough can be susceptible to leaking. It is recommend to s
- Cleaning of ToolsClean all tools and application equipment with Sika® Colma-Cleaner immediately after use. Hardened material (adhesive) can only be mechanically removed.
Follow the official Sika Technical Data Sheet for full application details.
Technical documents
Data sheets for this product
More data sheets in Sealing & Bonding
FAQs
Frequently asked questions
What is SikaSwell® P Profiles?
Sealing profiles which swell in contact with water to seal all types of joints and penetrations in concrete.
What packaging is available?
SikaSwell® P 20037 × 20 m = 140 mBox with 7 rolls SikaSwell® P 20057 × 20 m = 140 mBox with 7 rolls SikaSwell® P 20101 × 10 m = 10 m, 5 × 10 m = 50 m Box with 1 or 5 rolls Refer to current price list for packaging variations.
What is the shelf life?
48 months from date of production The product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +35 °C. Always refer to packaging. Dimensions TypeWidth mm Thickness mm
Related products
Related products
Sealants · Silicone sealants
Sikasil® WS-305 Black
Neutral-Cure Silicone Weatherproofing Sealant
Sika TDS In stock
View product & data sheet Get price on WhatsApp
Sealants · Waterstops / swellable seals
Sika Waterbars®
PVC Waterstops for Joint Waterproofing
Sika Reference
View product & data sheet Get price on WhatsApp
Sealants · Waterstops / swellable seals
SikaSeal® 910
Hydro-Swelling Waterbar for Cold Joints
Sika Reference
View product & data sheet Get price on WhatsApp
Quotation
Request a quotation for SikaSwell® P Profiles
Tell us the quantity and the site. We reply with price, lead time and the right pack size.
Technical advice
Need technical advice or current price?
Our team helps contractors and specifiers choose the right Sika solution and quote current pricing.
Chat on WhatsApp +92 300 5254439No prices are shown online — every quotation is prepared for the project.
Reviews
There are no reviews yet.