Skip to content
Concrete Repair & Protection · Repair Mortars

Sika REP

1-Component, Fibre-Reinforced, Low-Shrinkage Concrete Repair Mortar

Sika TDS In stock
In stock Available now from our Islamabad and Rawalpindi stock.
Brand
Sika
Packing
25 kg bag
Rs 5,500 per 25 kg bag

Ex Islamabad warehouse. Delivery charges extra. For project quantities, ask for a quotation.

  • Superior Workability Superior workability, including overhead application.
  • Good Adhesion Good adhesion to concrete, stone, brick and steel.
  • Low Shrinkage Low shrinkage behaviour.
  • Good Strength Good compressive and flexural strengths.
  • Good Finishing Good finishing.
  • Sika products supplierIslamabad & Rawalpindi.
  • Get a quote on WhatsAppSend your product and quantity for current pricing.
  • Technical support from MCTOur team helps you choose the right solution.
  • DeliveryContact our team to confirm delivery and lead times to your location.

Product at a glance

Mixing water
3.75 - 4.25 L of water per 25 kg bag
Application thickness
Min. 5 mm per layer Max. 30 mm per layer
Temperature range
+5 °C min / +35 °C max

Key benefits

  • Superior Workability
  • Good Adhesion
  • Low Shrinkage
  • Good Strength
  • Good Finishing
  • Hand or Machine

SikaRep® — 1-Component, Fibre-Reinforced, Low-Shrinkage Concrete Repair Mortar

SikaRep® PK is a 1-component, fibre reinforced, low shrinkage concrete repair mortar. It is mixed with water only and is suitable for hand and machine application, including overhead and vertical surfaces.

Recommended uses

  • Repair of spalling and damaged concrete in buildings, bridges, infrastructure and superstructure works
  • Increasing the bearing capacity of concrete structures by adding mortar
  • Increasing cover and replacing contaminated or carbonated concrete
  • Large volume repairs and large mortar thickness
  • Application on overhead and vertical surfaces
  • Filling pores, small damages, corners and joint edges

Tags

Technical information

Technical information

Verified performance data for SikaRep®, taken directly from the Sika Pakistan Product Data Sheet.

SikaRep® — technical data
Chemical BaseCement, selected aggregates and additives
Packaging25 kg Bag
Shelf Life6 months minimum from the production date
Storage ConditionsStore properly in undamaged original sealed packaging, in dry cool conditions
Appearance / ColourGrey powder
Maximum Grain Size2.5 mm
Compressive Strength~40 MPa after 28 days
Mixing Ratio3.75 - 4.25 L of water per 25 kg bag
Fresh Mortar Density~2.25 kg/l (25 °C)
Yield~12.8 L per 25 kg bag
Layer ThicknessMin. 5 mm per layer Max. 30 mm per layer
Ambient Air Temperature+5 °C min / +35 °C max
Substrate Temperature+5 °C min / +35 °C max

Product information verified from the official Sika Pakistan product page (pak.sika.com). Full numerical specifications: request the latest Sika Pakistan PDS.

Packaging & storage

Packaging & storage

Packaging

25 kg bag

Storage

Store in original unopened packaging in dry conditions, protected from direct sunlight and moisture. Refer to the official PDS for exact storage temperature and shelf life.

Application guide

Application guide (5 easy steps)

  1. Substrate PreparationRemove all loose and deteriorated material to expose a sound substrate. Clean the surface of dust, oil, grease and laitance. Square the edges of the repair area and pre-soak the substrate with water to a saturated surface-dry (SSD) condition before application.
  2. MixingSikaRep is one component; add clean water only and mix to a uniform, lump-free consistency. Follow the current official Sika Pakistan PDS for the exact water quantity and mixing time.
  3. PrimingWhile the prepared substrate is still damp, prime with a slurry coat of SikaRep (or a suitable Sika bonding primer) so the repair mortar is applied wet-on-wet for best adhesion.
  4. ApplicationApply SikaRep onto the primed, damp substrate and compact well. Build up to the required thickness and finish to the desired surface. Refer to the official PDS for maximum layer thickness.
  5. Curing & CleaningCure using approved methods; moist-cure immediately after the mortar reaches initial set and protect from rapid drying, direct sun and strong wind. Clean tools with water immediately; hardened material can only be removed mechanically.

Follow the official Sika Technical Data Sheet for full application details.

Technical documents

Data sheets for this product

Technical Library
PDF
SikaRep® PKProduct Data Sheet · October 2023, Version 01.02
803 KB PDF

More data sheets in Concrete Repair & Protection

FAQs

Frequently asked questions

What is SikaRep® PK?

A 1-component, fibre reinforced, low shrinkage concrete repair mortar, per the Sika Pakistan Product Data Sheet (October 2023, v01.02).

Where can SikaRep be used?

For repair of spalling and damaged concrete in buildings, bridges and infrastructure, including overhead and vertical surfaces.

How is it mixed?

It is a one-component mortar mixed with clean water only: 3.75 to 4.25 L of water per 25 kg bag, per the PDS.

What packaging is available?

25 kg bag (grey powder).

Where can I get the full technical specifications?

Detailed performance figures are provided in the current official Sika Pakistan Product Data Sheet, which our team can share on request.

Reviews

There are no reviews yet.

Be the first to review “Sika REP”

Your email address will not be published. Required fields are marked *

Quotation

Request a quotation for SikaRep®

Tell us the quantity and the site. We reply with price, lead time and the right pack size.

We use these details only to prepare your quotation and confirm availability. Prefer to talk? Call +92 300 5254439.

Technical advice

Need technical advice or current price?

Our team helps contractors and specifiers choose the right Sika solution and quote current pricing.

Chat on WhatsApp +92 300 5254439Listed price is ex Islamabad warehouse; delivery extra. Project quantities are quoted per project.

Consult to Place Order