Skip to content
Waterproofing · Cementitious Waterproofing

SikaSeal®-105

Official name SikaSeal®-105 PK

Cement-Based, Polymer-Modified 2-Component Waterproofing Slurry

Sika TDS In stock
In stock Available now from our Islamabad and Rawalpindi stock.
SKU
SIKA Ultra Membrane Seal 105 A+B
Brand
Sika
Packing
25 kg and 12.5 kg kits (A+B)
Rs 3,500 per 12.5 kg set

Ex Islamabad warehouse. Delivery charges extra. For project quantities, ask for a quotation.

  • Two-Component Pre-batched, no water added on site.
  • Crystalline + Polymer Combines crystallisation, pore-blocking and polymer waterproofing.
  • Positive & Negative Resists water from both sides.
  • Flexible Application Brush, trowel or spray applied.
  • Internal & External Suitable for a wide range of structures.
  • Sika products supplierIslamabad & Rawalpindi.
  • Get a quote on WhatsAppSend your product and quantity for current pricing.
  • Technical support from MCTOur team helps you choose the right solution.
  • DeliveryContact our team to confirm delivery and lead times to your location.

Product at a glance

Mixing water
Used as slurry A : B 1 : 4 by weight Used as Mortar A : B 1 : 4.5 by weight 2 2
Application thickness
Min. 1 mm per coat Max. 2 mm per coat
Temperature range
+5 °C min. / +40 °C max

Key benefits

  • Two-Component
  • Crystalline + Polymer
  • Positive & Negative
  • Flexible Application
  • Internal & External
  • Economical System

SikaSeal®-105 PK — Cement-Based, Polymer-Modified 2-Component Waterproofing Slurry

SikaSeal®-105 PK is a cement-based, polymer-modified, two-component, multipurpose waterproofing slurry. It combines a crystallisation action and pore-blocking effect with the waterproofing ability of special polymers, fillers and graded aggregates. Supplied pre-batched (no water added), it is brush, trowel or spray applied and can be used against positive and negative water pressure, for internal and external waterproofing of water-containment structures.

Recommended uses

  • Water and sewage works (tanks, manholes)
  • Water-retaining structures
  • Balconies and bathrooms
  • Basements and foundations
  • Internal and external waterproofing

Tags

Technical information

Technical information

Verified performance data for SikaSeal®-105 PK, taken directly from the Sika Pakistan Product Data Sheet.

SikaSeal®-105 PK — technical data
Chemical BaseCement, selected graded aggregates and polymer dispersion
Packaging25 kg (5 kg pails of component A and 20 kg bags of component B)
Appearance / ColourComponent A: White Liquid Component B: Grey powder Component A+B: Grey Slurry
Shelf Life6 months minimum from production date if stored properly in original unopened packaging
Storage ConditionsThe product must be stored properly in undamaged, unopened original sealed packaging in dry conditions at temperatures between +5° C and +35° C. Protect from direct sunlight and frost
Maximum Grain Size~0.6 mm
Tensile Strength in Flexure~9.6 N/mm2 (28 days) (EN 196)
Tensile Adhesion Strength~1.5 N/mm2 (ASTM D 4541)
Mixing RatioUsed as slurry A : B 1 : 4 by weight Used as Mortar A : B 1 : 4.5 by weight 2 2
Layer ThicknessMin. 1 mm per coat Max. 2 mm per coat
Ambient Air Temperature+5 °C min. / +40 °C max
Substrate Temperature+5 °C min. / +40 °C max
Fresh Mortar Density~2.00 kg/l BASIS OF PRODUCT DATA

Technical data: refer to the latest official Sika Pakistan Product Data Sheet, available on request.

Packaging & storage

Packaging & storage

Packaging

25 kg and 12.5 kg kits (A+B)

Storage

Store in original, unopened and undamaged sealed packaging in dry conditions, protected from frost and direct sunlight. Refer to the PDS for exact storage and shelf life.

Application guide

Application guide (5 easy steps)

  1. Substrate PreparationThe substrate must be sound, clean and free from laitance, dust and loose material. Pre-wet to a saturated surface-dry condition before application.
  2. MixingAdd the pre-batched powder (Part A) to the liquid (Part B) and mix with a low-speed mixer to a lump-free, uniform consistency. No additional water is added.
  3. First CoatApply the first coat by brush, trowel or suitable mortar spray pump, working it well into the surface.
  4. Second CoatApply the second coat once the first has set sufficiently (for floors, ideally after 24 hours, lightly re-wetting the first coat). For water-retaining structures apply a total of about 4-8 kg/m2 depending on water head.
  5. Finishing & CuringFinish by rubbing down with a soft dry sponge. Protect from rapid drying and cure the coating properly.

Follow the official Sika Technical Data Sheet for full application details.

Technical documents

Data sheets for this product

Technical Library
PDF
SikaSeal®-105 PKProduct Data Sheet · February 2026, Version 02.01
905 KB PDF

More data sheets in Sealing & Bonding · Waterproofing

FAQs

Frequently asked questions

What is SikaSeal®-105 PK?

A cement-based, polymer-modified, two-component waterproofing slurry for internal and external waterproofing.

Does it need water added?

No, it is pre-batched as two components (A+B); no water is added on site.

Can it resist negative pressure?

Yes, it can be used against positive and negative water pressure.

How is it applied?

By brush, trowel or spray in a minimum of two coats.

Where are the full technical specifications?

Detailed figures are in the current official Sika Pakistan Product Data Sheet, available on request.

Reviews

There are no reviews yet.

Be the first to review “SikaSeal®-105”

Your email address will not be published. Required fields are marked *

Quotation

Request a quotation for SikaSeal®-105 PK

Tell us the quantity and the site. We reply with price, lead time and the right pack size.

We use these details only to prepare your quotation and confirm availability. Prefer to talk? Call +92 300 5254439.

Technical advice

Need technical advice or current price?

Our team helps contractors and specifiers choose the right Sika solution and quote current pricing.

Chat on WhatsApp +92 300 5254439Listed price is ex Islamabad warehouse; delivery extra. Project quantities are quoted per project.

Consult to Place Order