Skip to content
Flooring · Primers

Sikafloor-161 (AB)

Official name Sikafloor®-161

Two-Part, Low-Viscosity, Multipurpose Epoxy Primer & Binder

Sika TDS On demand
Available on order Not held in stock. Ask us for the current lead time and minimum order.
Brand
Sika
Packing
Part A + B pre-weighed units: 5 kg, 20 kg, 25 kg sets; 220 kg drums for large projects
  • Low Viscosity Good penetration into the substrate.
  • Excellent Bond Strong adhesion to concrete and screeds.
  • Multipurpose Primer, binder, levelling mortar and intermediate layer.
  • Solvent Free Two-component, solvent-free epoxy.
  • Short Waiting Times Fast overcoating for efficient work.

Price on request — quoted per project.

  • Sika products supplierIslamabad & Rawalpindi.
  • Get a quote on WhatsAppSend your product and quantity for current pricing.
  • Technical support from MCTOur team helps you choose the right solution.
  • DeliveryContact our team to confirm delivery and lead times to your location.

Product at a glance

Pot life
Temperature Time +10 °C ~50 min +20 °C ~25 min +30 °C ~15 min
Temperature range
+10 °C min. / +35 °C max

Key benefits

  • Low Viscosity
  • Excellent Bond
  • Multipurpose
  • Solvent Free
  • Short Waiting Times
  • System Compatible

Sikafloor®-161 — Two-Part, Low-Viscosity, Multipurpose Epoxy Primer & Binder

Sikafloor®-161 is an economical, two-part, solvent-free, low-viscosity epoxy resin. It is used for priming concrete substrates, cement screeds and epoxy mortars on low to medium absorbent surfaces; as a primer for the Sikafloor-263 SL and Sikafloor-264 flooring systems and the Sikalastic-800 series; as a binder for levelling mortars and mortar screeds; and as an intermediate layer beneath Sikafloor-263 SL and Sikafloor-264. It offers low viscosity, good penetration, excellent bond strength and short waiting times.

Recommended uses

  • Priming concrete and cement screeds
  • Binder for epoxy levelling mortars and screeds
  • Primer for Sikafloor-263 SL / -264 systems
  • Intermediate layer in flooring build-ups
  • Low to medium absorbent substrates

Tags

Technical information

Technical information

Verified performance data for Sikafloor®-161, taken directly from the Sika Pakistan Product Data Sheet.

Sikafloor®-161 — technical data
Chemical BaseEpoxy
Appearance / ColourResin - Part A Brownish-transparent, liquid Hardener - Part B Transparent, liquid
Shelf Life24 months from date of production
Storage ConditionsThe packaging must be stored properly in original, unopened and undamaged sealed packaging, in dry conditions at temperatures between +5 °C and +30 °C. (DIN EN ISO 2811-1)
DensityPart A ~1.6 kg/l Part B ~1.0 kg/l Mixed Resin ~1.4 kg/l All density values at +23 °C Solid content by weight ~100 % Solid content by volume ~100 %
Shore D Hardness~76 (7 d / +23 °C) (ISO 4624)
Ambient Air Temperature+10 °C min. / +35 °C max
Pot LifeTemperature Time +10 °C ~50 min +20 °C ~25 min +30 °C ~15 min

Technical data: refer to the latest official Sika Pakistan Product Data Sheet, available on request.

Packaging & storage

Packaging & storage

Packaging

Part A + B pre-weighed units: 5 kg, 20 kg, 25 kg sets; 220 kg drums for large projects

Storage

Store in original, unopened and undamaged sealed packaging in dry conditions, protected from direct sunlight and frost. Refer to the PDS for exact storage temperature and shelf life.

Application guide

Application guide (5 easy steps)

  1. Substrate PreparationConcrete must be sound, clean and dry with sufficient tensile strength. Prepare mechanically (e.g. diamond grinding or shot blasting) to remove laitance and open the surface; repair defects with a suitable Sika mortar.
  2. PrimingPrime the prepared substrate with the appropriate Sikafloor primer (e.g. Sikafloor-161) and allow the correct waiting time before overcoating.
  3. MixingMix Part A, then add all of Part B and mix with a low-speed mixer to a uniform, streak-free consistency. Mix only full units; observe the pot life.
  4. ApplicationApply within the pot life by the method specified for the system (squeegee, serrated trowel, pin rake or roller). Backroll / spike-roll as required to release entrapped air and achieve even thickness.
  5. CuringProtect from moisture, condensation and traffic during cure. Respect the recoat and full-cure times stated in the PDS before loading.

Follow the official Sika Technical Data Sheet for full application details.

Technical documents

Data sheets for this product

Technical Library
PDF
Sikafloor®-161Product Data Sheet · May 2021, Version 05.01
118 KB PDF

More data sheets in Flooring

FAQs

Frequently asked questions

What is Sikafloor®-161?

A two-part, low-viscosity, multipurpose epoxy resin used as a primer, binder, levelling mortar and intermediate layer.

What can it prime?

Concrete, cement screeds and epoxy mortars, and it is the primer for Sikafloor-263 SL and -264 systems.

Is it solvent free?

Yes, it is a solvent-free two-component epoxy.

How is it applied?

By brush, roller or squeegee onto a properly prepared substrate.

Where are the full technical specifications?

Detailed figures are in the current official Sika Pakistan Product Data Sheet, available on request.

Reviews

There are no reviews yet.

Be the first to review “Sikafloor-161 (AB)”

Your email address will not be published. Required fields are marked *

Quotation

Request a quotation for Sikafloor®-161

Tell us the quantity and the site. We reply with price, lead time and the right pack size.

We use these details only to prepare your quotation and confirm availability. Prefer to talk? Call +92 300 5254439.

Technical advice

Need technical advice or current price?

Our team helps contractors and specifiers choose the right Sika solution and quote current pricing.

Chat on WhatsApp +92 300 5254439Every quotation is prepared for the project.

Consult to Place Order