Skip to content
Flooring · Epoxy flooring

Sikafloor-264

Two-Part, High-Build Epoxy Floor Coating

Sika TDS Reference
Catalogue reference Listed for technical reference. Not currently stocked — ask us for the nearest available alternative.
Brand
Sika
Packing
Pre-weighed Part A + B kit (refer to current packaging / price list)
  • High-Build Coating Roller or self-smoothing high-build finish.
  • Hard-Wearing Good mechanical and abrasion resistance.
  • Chemical Resistant Resists many chemicals (see resistance table).
  • Easy to Clean Seamless and hygienic surface.
  • Economic System Part of the economic Sikafloor flooring system.

Price on request — quoted per project.

  • Sika products supplierIslamabad & Rawalpindi.
  • Get a quote on WhatsAppSend your product and quantity for current pricing.
  • Technical support from MCTOur team helps you choose the right solution.
  • DeliveryContact our team to confirm delivery and lead times to your location.

Product at a glance

Pot life
Temperature Time +10 °C ~ 50 minutes +20 °C ~ 25 minutes +30 °C ~ 15 minutes
Temperature range
+10 °C min. / +30 °C max

Key benefits

  • High-Build Coating
  • Hard-Wearing
  • Chemical Resistant
  • Easy to Clean
  • Economic System
  • Colour Range

Sikafloor®-264 — Two-Part, High-Build Epoxy Floor Coating

Sikafloor®-264 is a two-part, economical, coloured epoxy resin used as a high-build roller or self-smoothing coating for concrete and cementitious floors. It produces a hard-wearing, chemically resistant, easy-to-clean surface for industrial and commercial floors and is available in a range of colours, applied as part of the economic Sikafloor-161 / -264 system.

Recommended uses

  • Industrial and commercial floors
  • Workshops and production areas
  • Warehouses and storage
  • Areas needing a cleanable, durable floor
  • Coloured protective floor coatings

Tags

Technical information

Technical information

Verified performance data for Sikafloor®-264, taken directly from the Sika Pakistan Product Data Sheet.

Sikafloor®-264 — technical data
Chemical BaseEpoxy
Shelf Life24 months from date of production
Storage ConditionsThe product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C
Shore D Hardness(DIN 53 505) ~76 (7 days / +23 °C)
Abrasion Resistance(DIN 53109) ~35 mg (CS 10/1000/1000) (7 days / +23 °C) 2
Compressive Strength(EN196-1) ~53 N/mm (Resin filled 1:0.9 with F34) (28 days / +23 °C) 2
Tensile Strength in Flexure(EN 196-1) ~20 N/mm (Resin filled 1:0.9 with F34) (28 days / +23 °C)
Tensile Adhesion Strength(ISO 4624) > 1,5 N/mm² (failure in concrete)
Ambient Air Temperature+10 °C min. / +30 °C max
Substrate Temperature+10 °C min. / +30 °C max. Substrate Moisture Content < 4 % pbw moisture content. Test method: Sika®-Tramex meter, CM-measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet)
Pot LifeTemperature Time +10 °C ~ 50 minutes +20 °C ~ 25 minutes +30 °C ~ 15 minutes

Source: Sika Pakistan product identity, Sikafloor®-264 (pak.sika.com / Sika Pakistan). Full numerical specifications: request the latest Sika Pakistan PDS.

Packaging & storage

Packaging & storage

Packaging

Pre-weighed Part A + B kit (refer to current packaging / price list)

Storage

Store in original, unopened and undamaged sealed packaging in dry conditions, protected from direct sunlight and frost. Refer to the PDS for exact storage temperature and shelf life.

Application guide

Application guide (5 easy steps)

  1. Substrate PreparationConcrete must be sound, clean and dry with sufficient tensile strength. Prepare mechanically (e.g. diamond grinding or shot blasting) to remove laitance and open the surface; repair defects with a suitable Sika mortar.
  2. PrimingPrime the prepared substrate with the appropriate Sikafloor primer (e.g. Sikafloor-161) and allow the correct waiting time before overcoating.
  3. MixingMix Part A, then add all of Part B and mix with a low-speed mixer to a uniform, streak-free consistency. Mix only full units; observe the pot life.
  4. ApplicationApply within the pot life by the method specified for the system (squeegee, serrated trowel, pin rake or roller). Backroll / spike-roll as required to release entrapped air and achieve even thickness.
  5. CuringProtect from moisture, condensation and traffic during cure. Respect the recoat and full-cure times stated in the PDS before loading.

Follow the official Sika Technical Data Sheet for full application details.

Technical documents

Data sheets for this product

Technical Library
PDF
Sikafloor®-264Product Data Sheet · May 2021, Version 08.01
470 KB PDF

More data sheets in Flooring

FAQs

Frequently asked questions

What is Sikafloor®-264?

A two-part, high-build coloured epoxy floor coating for industrial and commercial floors.

How is it applied?

As a high-build roller or self-smoothing coating onto a primed substrate.

Is it chemically resistant?

Yes, it resists many chemicals; refer to the resistance table.

Does it need a primer?

Yes, prime with Sikafloor-161 before application.

Where are the full technical specifications?

Detailed figures are in the current official Sika Pakistan Product Data Sheet, available on request.

Reviews

There are no reviews yet.

Be the first to review “Sikafloor-264”

Your email address will not be published. Required fields are marked *

Quotation

Request a quotation for Sikafloor®-264

Tell us the quantity and the site. We reply with price, lead time and the right pack size.

We use these details only to prepare your quotation and confirm availability. Prefer to talk? Call +92 300 5254439.

Technical advice

Need technical advice or current price?

Our team helps contractors and specifiers choose the right Sika solution and quote current pricing.

Chat on WhatsApp +92 300 5254439Every quotation is prepared for the project.

Consult to Place Order