Waterproofing · Integral waterproofing admixtures
Sika®-1
Normal-Setting Liquid Integral Waterproofing Admixture
Sika TDS In stock
View product & data sheet Get price on WhatsApp
Waterproofing · Damp-proofing / moisture protection
SikaMur® InjectoCream-100
Sika TDS On demand
Available on order Not held in stock. Ask us for the current lead time and minimum order.
- Easy to install Easy to install (low risk for operative error, not so dependent on operative skills). 1-component, ready to use.
- Small waste disposal Small waste disposal.
- No risk of increased efflorescence No risk of increased efflorescence (as with siliconate rising damp treatments).
Prices are quoted per project — no prices are shown online.
- Sika products supplierIslamabad & Rawalpindi.
- Get a quote on WhatsAppSend your product and quantity for current pricing.
- Technical support from MCTOur team helps you choose the right solution.
- DeliveryContact our team to confirm delivery and lead times to your location.
Product at a glance
Temperature range
+5 °C min. / +35 °C max. Injection works shall be carried out when the temperature does not drop below 0 °C for at least 48 hours after application to allow the material to diffuse optimally.
Key benefits
- Easy to install
- Small waste disposal
- No risk of increased efflorescence
SikaMur® InjectoCream-100
SikaMur® InjectoCream-100 is a new concept for the control of rising damp. SikaMur® InjectoCream-100 is a water repellent cream, packed in a 600 ml sausage or 300 ml cartridge. It is inserted into a series of holes drilled into a mortar course of the masonry by means of a simple application gun - no special injection pump required. Once injected into the mortar course, SikaMur® InjectoCream-100 will diffuse within the damp wall to form a Damp Proof Course (DPC), will allow the wall to dry and block future rising damp. SikaMur® InjectoCream-100 complies with the requirements of WTA Guideline 4–4-04/D “Injection of masonry in order to avoid capillary moisture content”.
Recommended uses
- SikaMur® InjectoCream-100 can be used to treat rising damp in almost all types of masonry walls: Solid brick walls
- Cavity walls
- Random form stone and rubble infill walls, etc.
Technical information
Technical information
Verified performance data for SikaMur® InjectoCream-100, taken directly from the Sika Pakistan Product Data Sheet.
| Chemical Base | Silane based emulsion |
|---|---|
| Colour | White |
| Density | ~0,90 kg/l (20 °C) |
| Consumption | Number of sausages (in brackets: cartridges) required: Length of wallWall thickness 110 mm220 mm330 mm440 mm 10 m1,5 (3)3,0 (6)5,1 (10,2)7,0 (14) 20 m3,0 (6)6,0 (12)10,2 (20,4)13,0 (26) 30 m4,6 (9,2)9,0 (18)15,3 (30,6)21 |
| Ambient Air Temperature | +5 °C min. / +35 °C max. Injection works shall be carried out when the temperature does not drop below 0 °C for at least 48 hours after application to allow the material to diffuse optimally. |
| Standards | Tested as product for the treatment of rising damp in masonry by the Belgium Building Research Institute (Report ref. BE 407–695–057 dated 6 th of July 2009) Tested according to WTA Guideline 4–4–04/D- Report No. M 1954/ |
Source: Sika Pakistan Product Data Sheet, SikaMur® InjectoCream-100 (December 2022, Version 01.01).
Packaging & storage
Packaging & storage
Packaging
600 ml sausage (Boxes of 10 sausages) 300 ml cartridge (Boxes of 12 cartridges)
Storage
sunlight and humidity.
Shelf life
12 months shelf life from date of production if stored properly in undamaged, unopened, original sealed packaging. Dry storage at temperatures from +5 °C up to +35 °C. Protect from direct
Application guide
Application guide (1 step)
- ApplicationNOTES ON INSTALLATION Drill holes For treatment to be effective, the correct volume of SikaMur® InjectoCream-100 must be used. The system requires 12 mm diameter holes to be drilled at horizontal centres no greater than 120 mm apart. The depth of the holes required for various wall thicknesses is shown in the table below. For all other wall thickness, the depth of the holes shall be within 40 mm of the opposite side.
Follow the official Sika Technical Data Sheet for full application details.
Technical documents
Data sheets for this product
More data sheets in Concrete Repair & Protection
FAQs
Frequently asked questions
What is SikaMur® InjectoCream-100?
SikaMur® InjectoCream-100 is a new concept for the control of rising damp.
What packaging is available?
600 ml sausage (Boxes of 10 sausages) 300 ml cartridge (Boxes of 12 cartridges)
What is the shelf life?
12 months shelf life from date of production if stored properly in undamaged, unopened, original sealed packaging. Dry storage at temperatures from +5 °C up to +35 °C. Protect from direct sunlight and humidity.
Related products
Related products
Waterproofing · Liquid-applied waterproofing
Sikalastic®-510 PK
Single-Component Acrylic Liquid-Applied Waterproofing Membrane
TDS In stock
View product & data sheet Get price on WhatsApp
Waterproofing · Integral waterproofing admixtures
Sikalite®-101 PK
Powder Integral Waterproofer for Cement/Sand Mortars
Sika TDS In stock
View product & data sheet Get price on WhatsApp
Waterproofing · Cementitious waterproofing
SikaSeal®-105 PK
Cement-Based, Polymer-Modified 2-Component Waterproofing Slurry
Sika TDS In stock
View product & data sheet Get price on WhatsApp
Quotation
Request a quotation for SikaMur® InjectoCream-100
Tell us the quantity and the site. We reply with price, lead time and the right pack size.
Technical advice
Need technical advice or current price?
Our team helps contractors and specifiers choose the right Sika solution and quote current pricing.
Chat on WhatsApp +92 300 5254439No prices are shown online — every quotation is prepared for the project.
Reviews
There are no reviews yet.