Image on request
Concrete Repair & Protection · Non-shrink grouts
SikaGrout®-113 PK
Cementitious, Core Grout For Filling
Sika TDS On demand
View product & data sheet Get price on WhatsApp
Concrete Repair & Protection · Grouting
SikaGrout®-114 PK
Cementitious, Shrinkage-Compensated, General Purpose Precision Grout
Sika TDS In stock
In stock Available now from our Islamabad and Rawalpindi stock.
Rs 2,850 per 25 kg bag
Ex Islamabad warehouse. Delivery charges extra. For project quantities, ask for a quotation.
- Easy to Mix Requires only the addition of water.
- Good Flow Characteristics Free-flowing for grouting into confined spaces.
- Adjustable Consistency From dry-pack to highly flowable by water dosage.
- High Final Strengths High ultimate compressive strength.
- Non-Corrosive & Iron-Free Contains no metallic aggregates.
- Sika products supplierIslamabad & Rawalpindi.
- Get a quote on WhatsAppSend your product and quantity for current pricing.
- Technical support from MCTOur team helps you choose the right solution.
- DeliveryContact our team to confirm delivery and lead times to your location.
Product at a glance
Mixing water
0.08 (dry pack) / 0.09 (plastic-flowable) / 0.11 (highly flowable)
Application thickness
Min. 10 mm / Max. 50 mm per pour
Pot life
Approx. 30 minutes at 23 C
Temperature range
+5 C to +35 C
Key benefits
- Easy to Mix
- Good Flow Characteristics
- Adjustable Consistency
- High Final Strengths
- Non-Corrosive & Iron-Free
- Shrinkage Compensated
SikaGrout®-114 PK — Cementitious, Shrinkage-Compensated, General Purpose Precision Grout
SikaGrout®-114 PK is a cementitious, free-flowing, economical, general-purpose, non-shrink precision grout with high ultimate strength. It requires only the addition of water and is suitable for use in hot and tropical climatic conditions.
Recommended uses
- Machine foundations
- Columns in pre-cast construction
- Concrete anchors, cavities, gaps and recesses
- Base plates
- General concrete repairs
- Bridge bearing pads
Technical information
Technical information
Verified performance data for SikaGrout®-114 PK, taken directly from the Sika Pakistan Product Data Sheet.
| Chemical Base | Portland cement, selected fillers and aggregates, special additives |
|---|---|
| Appearance / Colour | Grey powder |
| Maximum Grain Size | Max 4 mm |
| Standards | ASTM C1107 (Type C); CRD-C621-83-10.2 |
| Compressive Strength | >=30 MPa (1d); >=45 MPa (3d); >=55 MPa (7d); >=65 MPa (28d) (ASTM C109) |
| Modulus of Elasticity | 35,000 N/mm2 |
| Expansion | +0.08 % after 28 days |
| Tensile Adhesion Strength | >=1.15 N/mm2 (concrete failure) (BS 1881) |
| Fresh Mortar Density | Approx. 2.4 kg/L |
| Water/Powder Ratio | 0.08 (dry pack) / 0.09 (plastic-flowable) / 0.11 (highly flowable) |
| Yield | Approx. 12.4-13 L per 25 kg bag, depending on water addition |
| Layer Thickness | Min. 10 mm / Max. 50 mm per pour |
| Ambient / Substrate Temperature | +5 C to +35 C |
| Pot Life | Approx. 30 minutes at 23 C |
| Standards | ASTM C1107 (grout for preplaced-aggregate); ASTM C109 (compressive strength) |
Mixing
Pour the measured water into a clean container, then add the powder while mixing with a slow-speed drill under 500 rpm. Mix 2 to 3 minutes until smooth and lump-free, no longer than 5 minutes. Do not add aluminium or use aluminium tools. Place within 15 to 20 minutes.
Coverage
One 25 kg bag yields about 12.4 to 13 litres depending on water added. Water-to-powder ratio: 0.08 for dry pack, 0.09 for plastic to flowable, 0.11 for highly flowable.
Source: Sika Pakistan Product Data Sheet, SikaGrout®-114 PK (March 2026, Version 04.03).
Packaging & storage
Packaging & storage
Packaging
25 kg bag
Storage
Store in original unopened packaging in cool, dry conditions between +5 C and +35 C. Protect from direct sunlight, heat and moisture.
Shelf life
Minimum 6 months from date of production (correctly stored).
Application guide
Application guide (5 easy steps)
- Substrate PreparationConcrete surfaces must be clean, sound, rough and free from oil, grease, cement laitance and loose particles. Saturate absorbent surfaces thoroughly with clean water. Metal surfaces must be free from scale, rust, oil and grease.
- MixingAdd water for the desired consistency into a clean vessel, then slowly add the powder. Mix in a forced-action or slow-speed paddle mixer (max 500 rpm) for 2 to 3 minutes until lump-free, no longer than 5 minutes. Do not add extra water or ingredients; mix only full bags.
- Standing TimeBefore pouring, let the mixed grout stand for approximately 5 minutes to allow entrapped air to escape.
- ApplicationPour into the prepared area so the grout travels the shortest distance and displaced air can escape. For base-plate grouting, maintain a sufficient head of pressure to keep the grout flowing. Do not place more grout than can be used within 15 to 20 minutes.
- Curing & CleaningTreat exposed surfaces with Antisol-WB curing compound, polyethylene sheeting or wet hessian; do not begin fogging until final set. Clean tools with water immediately after use; hardened material can only be removed mechanically.
Follow the official Sika Technical Data Sheet for full application details.
Technical documents
Data sheets for this product
More data sheets in Concrete Repair & Protection
FAQs
Frequently asked questions
What is SikaGrout®-114 PK?
A cementitious, free-flowing, shrinkage-compensated, general-purpose precision grout with high ultimate strength, following ASTM C1107 (Type C). It requires only the addition of water.
What compressive strength does it reach?
Approximately >=30 MPa at 1 day, >=45 MPa at 3 days, >=55 MPa at 7 days and >=65 MPa at 28 days (ASTM C109).
What consistencies are possible?
From dry-pack/trowelable (W/P 0.08), to plastic-flowable (0.09), to highly flowable (0.11), adjusted by the water dosage.
What is the pot life?
Approximately 30 minutes at 23 C. Do not place more grout than can be used within 15 to 20 minutes.
What layer thickness can be poured?
Minimum 10 mm and maximum 50 mm per pour. Where thickness exceeds 75 mm, Sika recommends considering Sikacrete®-113 PP SA.
What packaging is available?
25 kg bag (grey powder).
Related products
Related products
Image on request
Concrete Repair & Protection · Non-shrink grouts
SikaGrout®-275 PK
SikaGrout®-275 PK is a cementitious, pre-bagged, free flowing, one component, non-shrink precision grout with high early and ultimate…
Sika TDS On demand
View product & data sheet Get price on WhatsApp
Concrete Repair & Protection · Non-shrink grouts
SikaGrout®-524
High-Strength, Non-Shrink, Cementitious Construction Grout
Sika Reference
View product & data sheet Get price on WhatsApp
Concrete Repair & Protection · Non-shrink grouts
SikaGrout®-928
Non-Shrink Cementitious Precision Grout with Extended Working Time
Sika TDS Reference
View product & data sheet Get price on WhatsApp
Quotation
Request a quotation for SikaGrout®-114 PK
Tell us the quantity and the site. We reply with price, lead time and the right pack size.
Technical advice
Need technical advice or current price?
Our team helps contractors and specifiers choose the right Sika solution and quote current pricing.
Chat on WhatsApp +92 300 5254439Listed price is ex Islamabad warehouse; delivery extra. Project quantities are quoted per project.
Reviews
There are no reviews yet.