Skip to content
Construction Chemicals & Specialty Systems · Structural epoxy adhesives

Sikadur 32LP

2-Part Epoxy Structural Bonding Agent for High Temperatures

Sika TDS On demand
Available on order Not held in stock. Ask us for the current lead time and minimum order.
Brand
Sika
Packing
5 kg ready-to-mix unit (Parts A + B)
  • High-Temperature Grade Application temperature range +20 C to +40 C.
  • Moisture Tolerant Bonds wet or dry materials to damp or dry substrates.
  • No Primer Needed Applied directly to the prepared substrate.
  • High Strength High initial and ultimate mechanical strengths.
  • No Shrinkage Hardens without shrinkage.

Price on request — quoted per project.

  • Sika products supplierIslamabad & Rawalpindi.
  • Get a quote on WhatsAppSend your product and quantity for current pricing.
  • Technical support from MCTOur team helps you choose the right solution.
  • DeliveryContact our team to confirm delivery and lead times to your location.

Product at a glance

Application thickness
~1 mm max. Sag Flow (EN 1799) Non-sag up to 1,0 mm thickness on vertical surfaces
Temperature range
+20 °C min. / +40 °C max

Key benefits

  • High-Temperature Grade
  • Moisture Tolerant
  • No Primer Needed
  • High Strength
  • No Shrinkage
  • Mixing Control

Sikadur®-32 LP — 2-Part Epoxy Structural Bonding Agent for High Temperatures

Sikadur®-32 LP is a 2-part, epoxy-based structural bonding agent for use at high temperatures. It is moisture tolerant and can bond wet or dry materials to damp or dry substrates, and is suitable for hot and tropical climatic conditions. It is used as a structural bonding agent and adhesive for bonding fresh (plastic) concrete to hardened concrete, and may only be used by experienced professionals.

Recommended uses

  • Structural bonding of fresh (plastic) concrete to hardened concrete
  • Bonding agent for concrete, mortar, steel and stone
  • Old-to-new concrete connections
  • High-temperature structural bonding applications

Tags

Technical information

Technical information

Verified performance data for Sikadur®-32 LP, taken directly from the Sika Pakistan Product Data Sheet.

Sikadur®-32 LP — technical data
Chemical BaseEpoxy resin and selected fillers
PackagingParts A+B 5 kg ready to mix unit Pallets of 390 units (450 kg) Parts A+B 1,2 kg ready to mix unit Box of 6 units (7,2 kg) Refer to current price list for packaging variations
Appearance / ColourPart A white Part B dark grey Parts A+B mixed concrete grey
Shelf Life24 months from date of production
Storage ConditionsThe product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packaging
DensityMixed resin ~1,4 ± 0,1 kg/l Value at +23 °C. Product Declaration EN 1504-4: Structural bonding
Elongation at Break(ISO 527) 1,0 ± 0,1 % (14 days at +23 °C)
ShrinkageHardens without shrinkage
Consumption~1,3 kg/m per mm of thickness. This figure is theoretical and does not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc
Layer Thickness~1 mm max. Sag Flow (EN 1799) Non-sag up to 1,0 mm thickness on vertical surfaces
Product Temperature+20 °C min. / +40 °C max
Ambient Air Temperature+20 °C min. / +40 °C max. Dew Point Beware of condensation. Steel substrate temperature during application must be at least +3 °C above dew point
Substrate Temperature+20 °C min. / +40 °C max. Substrate Moisture Content Cementitious substrates must be dry or matt damp (no standing water). Brush the adhesive well into the substrate if matt damp

Product information verified from the official Sika Pakistan product listing (pak.sika.com / Sika Pakistan). Full numerical specifications: request the latest Sika Pakistan PDS.

Packaging & storage

Packaging & storage

Packaging

5 kg ready-to-mix unit (Parts A + B)

Storage

Store in original, unopened and undamaged sealed packaging in dry conditions between +5 C and +30 C. Always refer to packaging.

Application guide

Application guide (5 easy steps)

  1. Substrate PreparationSubstrates must be sound and clean, prepared mechanically to an open-textured gripping profile, and free from standing water, ice, dirt, oil, grease, coatings, laitance, loose particles and other contaminants. Concrete may be dry or matt damp (no standing water). Steel must be prepared to bright metal.
  2. MixingMix components A and B thoroughly in the supplied proportions until a uniform, streak-free colour is achieved. Pot life begins when A and B are combined and is shorter at higher temperatures.
  3. ApplicationApply the mixed bonding agent to the prepared substrate, brushing well into the surface if matt damp. Applied thickness is up to 1 mm.
  4. BondingPlace the fresh concrete or bond the element onto the bonding coat while it is still tacky, within the open time. If the coat becomes glossy and loses tack, apply a fresh coat first.
  5. CleaningClean tools and equipment with Sika Colma Cleaner immediately after use. Hardened material can only be removed mechanically.

Follow the official Sika Technical Data Sheet for full application details.

Technical documents

Data sheets for this product

Technical Library
PDF
Sikadur®-32 LPProduct Data Sheet · March 2025, Version 02.01
1237 KB PDF

More data sheets in Sealing & Bonding

FAQs

Frequently asked questions

What is Sikadur®-32 LP?

A 2-part, epoxy structural bonding agent for high temperatures, used to bond fresh concrete to hardened concrete and other construction materials. It is moisture tolerant.

What thickness is applied?

Up to 1 mm as a bonding coat.

What is the application temperature range?

+20 C to +40 C, making it suitable for hot climates.

Does it need a primer?

No primer is needed; it is applied directly to the prepared substrate.

Where are the full technical specifications?

Detailed performance figures are provided in the current official Sika Pakistan Product Data Sheet, available on request.

Reviews

There are no reviews yet.

Be the first to review “Sikadur 32LP”

Your email address will not be published. Required fields are marked *

Quotation

Request a quotation for Sikadur®-32 LP

Tell us the quantity and the site. We reply with price, lead time and the right pack size.

We use these details only to prepare your quotation and confirm availability. Prefer to talk? Call +92 300 5254439.

Technical advice

Need technical advice or current price?

Our team helps contractors and specifiers choose the right Sika solution and quote current pricing.

Chat on WhatsApp +92 300 5254439Every quotation is prepared for the project.

Consult to Place Order