Skip to content
Injection Systems · Injection resins

Sikainjection 101

Official name Sika® Injection-101 RC

Low-Viscosity, Fast-Foaming Polyurethane Injection Resin for Water-Stopping

Sika TDS Reference
Catalogue reference Listed for technical reference. Not currently stocked — ask us for the nearest available alternative.
Brand
Sika
Packing
Container (refer to current packaging / price list)
  • Fast Foaming Reacts and foams on contact with water.
  • Water Stopping Seals flowing and pressurised water ingress.
  • High Expansion Free-foaming expansion up to many times its volume in water.
  • Flexible Foam Cures to a dense, flexible fine-celled foam.
  • Single Component Can be injected as a 1-component system.

Price on request — quoted per project.

  • Sika products supplierIslamabad & Rawalpindi.
  • Get a quote on WhatsAppSend your product and quantity for current pricing.
  • Technical support from MCTOur team helps you choose the right solution.
  • DeliveryContact our team to confirm delivery and lead times to your location.

Product at a glance

Temperature range
+5 °C min. / +35 °C max

Key benefits

  • Fast Foaming
  • Water Stopping
  • High Expansion
  • Flexible Foam
  • Single Component

Sika® Injection-101 RC — Low-Viscosity, Fast-Foaming Polyurethane Injection Resin for Water-Stopping

Sika® Injection-101 RC is a low-viscosity, fast-foaming, solvent-free, water-reactive polyurethane injection resin which cures to a dense, flexible foam with a fine cellular structure. Injected into water-bearing cracks and joints, it reacts on contact with water and foams to seal against flowing or pressurised water. It can be injected as a single-component system and is suitable for hot and tropical climatic conditions.

Recommended uses

  • Sealing water-bearing cracks and joints
  • Temporary and permanent water-stopping
  • Curtain and crack injection in concrete
  • Tunnels, basements and below-grade structures
  • Leak sealing in masonry and concrete

Tags

Technical information

Technical information

Verified performance data for Sika® Injection-101 RC, taken directly from the Sika Pakistan Product Data Sheet.

Sika® Injection-101 RC — technical data
Chemical BaseWater reactive polyurethane resin
PackagingPart A (Resin) 10 or 20 kg Part B ( Hardener) 12,5 or 25 kg Refer to current price list for packaging variations
Appearance / ColourPart A (Resin) Colourless Part B (Hardener) Brown
Shelf Life24 months from date of production
Storage ConditionsThe product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +35 °C. Always refer to packaging
Density(ISO 2811) Part A (Resin) ~1,0 kg/l Part B (Hardener) ~1,25 kg/l Values at +20 °C
Viscosity(ISO 3219) Part A (Resin) ~140 mPa·s Part B (Hardener) ~155 mPa·s Values at +20 °C
Ambient Air Temperature+5 °C min. / +35 °C max
Substrate Temperature+5 °C min. / +35 °C max

Technical data: refer to the latest official Sika Pakistan Product Data Sheet, available on request.

Packaging & storage

Packaging & storage

Packaging

Container (refer to current packaging / price list)

Storage

Store in original, unopened and undamaged sealed packaging in dry conditions, protected from frost and direct sunlight. Refer to the PDS for exact storage temperature and shelf life.

Application guide

Application guide (5 easy steps)

  1. Assessment & PackersAssess the leak and set injection packers along the crack/joint at appropriate spacing, drilling as required to intersect the water path.
  2. EquipmentUse a suitable single-component injection pump. Ensure equipment is clean and primed with the resin.
  3. InjectionInject the resin through the packers under controlled pressure; on contact with water it foams and expands to fill and seal the void.
  4. ControlWork systematically from the lowest point upward (or as the method statement dictates), monitoring for resin/foam emergence to confirm fill.
  5. FinishingOnce cured, remove packers and make good the surface. Clean equipment promptly with the recommended cleaner.

Follow the official Sika Technical Data Sheet for full application details.

FAQs

Frequently asked questions

What is Sika® Injection-101 RC?

A low-viscosity, fast-foaming polyurethane injection resin that seals water-bearing cracks and joints.

How does it work?

It reacts on contact with water and foams to fill and seal the void against water.

Is it single component?

Yes, it can be injected as a single-component system.

What is it used for?

Stopping flowing or pressurised water in cracks and joints in concrete and masonry.

Where are the full technical specifications?

Detailed figures are in the current official Sika Pakistan Product Data Sheet, available on request.

Reviews

There are no reviews yet.

Be the first to review “Sikainjection 101”

Your email address will not be published. Required fields are marked *

Quotation

Request a quotation for Sika® Injection-101 RC

Tell us the quantity and the site. We reply with price, lead time and the right pack size.

We use these details only to prepare your quotation and confirm availability. Prefer to talk? Call +92 300 5254439.

Technical advice

Need technical advice or current price?

Our team helps contractors and specifiers choose the right Sika solution and quote current pricing.

Chat on WhatsApp +92 300 5254439Every quotation is prepared for the project.

Consult to Place Order